From 1060ba1f7cd9edae812bf1fff572c19c29f47b84 Mon Sep 17 00:00:00 2001 From: simonox Date: Sun, 19 Feb 2023 16:59:19 +0100 Subject: [PATCH] gitea cannot render the code embedded --- software/firmware/energy-montior/README.md | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/software/firmware/energy-montior/README.md b/software/firmware/energy-montior/README.md index 053a7c9..183cfa4 100644 --- a/software/firmware/energy-montior/README.md +++ b/software/firmware/energy-montior/README.md @@ -1,6 +1,10 @@ # Energy Monitor -Our energy monitor is based on the openenergymonitor.org project (Licence GNU GPL V3). It uses our HelTec Wireless Stick. Power Measurement is done by a SCT013 clamp (100A:50mA). +Our energy monitor is based on the openenergymonitor.org project (Licence GNU GPL V3). + +It uses our HelTec Wireless Stick. This - of course - can be replaced by a cheaper ESP32 module. + +Power Measurement is done by a SCT013 clamp (100A:50mA). ## Used materials @@ -63,7 +67,7 @@ See the Fritzing file for [details](./energy-monitor/energy-monitor.fzz). Start with a simple code that just prints the values. The code is quite simple, as we can use the existing *[EmonLib libary V1.1.0 by OpenEnergyMonitor](https://docs.openenergymonitor.org/electricity-monitoring/ct-sensors/)*. -[code](https://code.curious.bio/curious.bio/iot-platform/src/commit/ecf0b3ee63c9d3d49bcf32a7da9bde64a6a62c28/software/firmware/energy-montior/energy-monitor/energy-monitor.ino) +[Check out the small amount of code to print the values to serial out.](https://code.curious.bio/curious.bio/iot-platform/src/commit/ecf0b3ee63c9d3d49bcf32a7da9bde64a6a62c28/software/firmware/energy-montior/energy-monitor/energy-monitor.ino) The only interesting part is this line: