taking a break
This commit is contained in:
parent
7e73db0fcf
commit
dcf58a770d
10
README.md
10
README.md
|
@ -26,9 +26,15 @@ NodeRed is running here: http://localhost:1880/
|
|||
### Arduino IDE
|
||||
We are using HelTec Automation Wirelsess Sticks ESP32 Dev-Boards. Their GitHub repo can be found here: https://github.com/HelTecAutomation/Heltec_ESP32
|
||||
|
||||
If you are using _Arduino IDE_ (just to try them out) you can add their Repo to the library managers URLs: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/library.json and/or find them in the IDE (Sketch -> Include Library -> Manage Libraries... Search for "heltec esp32").
|
||||
|
||||
### Find the port
|
||||
I had to install VCP Drivers, first: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads
|
||||
|
||||
You can add their Board Manager to the boards managers URLs: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/library.json and find their libraries in the IDE (Sketch -> Include Library -> Manage Libraries... Search for "heltec esp32").
|
||||
|
||||
|
||||
### Find the port
|
||||
|
||||
Usually you can find the used port using `esptool.py`, but that's not working for me, atm (continue here)....
|
||||
|
||||
```sh
|
||||
esptool.py write_flash_status --non-volatile 0
|
||||
|
|
Loading…
Reference in a new issue