New Issue

Formbau

Formbau

Positiv-Form

Volumen: 4873 ml

BigRep

2mm Wandung umlaufend 1340 g PLA

Ultimaker

0.2 Schicht, 5 Wandlinen, 10 Top/Bottom Layer, 25% Infill (bereits gedruckt): 2158 g PLA
0.2 Schicht, 4 Wandlinen, 8 Top/Bottom Layer, 15% Infill: 1500 g PLA

Negativ-Form

Volumen Gips: 4777 ml

BigRep

PLA nach Dreisatz aus dem Wert aus der Positiv-Form ca 850g

Ultimaker

0.2 Schicht, 5 Wandlinen, 10 Top/Bottom Layer, 25% Infill (bereits gedruckt): 1522 g
0.2 Schicht, 4 Wandlinen, 8 Top/Bottom Layer, 15% Infill: 1417 g

0

To Do

0

Doing

12

Done

Filament Menge an Openlab kommunizieren

#16 by lukas was closed 2022-12-01 07:59:27 +01:00

Vakuumiergerät Zugang

#27 by thies was closed 2023-01-31 10:36:53 +01:00

Folierung der Oberfläche als Plan B

#37 by thies was closed 2023-01-31 10:36:20 +01:00

Negativformen Drucken

#48 by thies was closed 2023-01-31 10:35:16 +01:00

Formbau Variante "3D-Druck und Abformen" durchspielen

#18 by lukas was closed 2022-12-26 12:26:41 +01:00

Deckel Lasercutten

#43 by felix was closed 2022-12-26 12:27:18 +01:00

Schalung festlegen

#35 by lukas was closed 2022-12-26 12:25:52 +01:00

Openlab BigRep - Düse und Slicer

#20 by lukas was closed 2022-11-30 14:54:13 +01:00

Entscheidung Gips VS PLA

#47 by lukas was closed 2022-12-16 14:19:44 +01:00

Innenrundung der Box auf Formteile übertragen

#46 by lukas was closed 2022-12-16 14:20:31 +01:00

Trennmittel kaufen

#45 by lukas was closed 2022-12-22 10:01:00 +01:00

Gips kaufen

#36 by lukas was closed 2022-12-26 12:25:20 +01:00