diff --git a/LICENSE.txt b/LICENSE.txt deleted file mode 100644 index 114486f..0000000 --- a/LICENSE.txt +++ /dev/null @@ -1,289 +0,0 @@ -CERN Open Hardware Licence Version 2 - Strongly Reciprocal - - -Preamble - -CERN has developed this licence to promote collaboration among -hardware designers and to provide a legal tool which supports the -freedom to use, study, modify, share and distribute hardware designs -and products based on those designs. Version 2 of the CERN Open -Hardware Licence comes in three variants: CERN-OHL-P (permissive); and -two reciprocal licences: CERN-OHL-W (weakly reciprocal) and this -licence, CERN-OHL-S (strongly reciprocal). - -The CERN-OHL-S is copyright CERN 2020. Anyone is welcome to use it, in -unmodified form only. - -Use of this Licence does not imply any endorsement by CERN of any -Licensor or their designs nor does it imply any involvement by CERN in -their development. - - -1 Definitions - - 1.1 'Licence' means this CERN-OHL-S. - - 1.2 'Compatible Licence' means - - a) any earlier version of the CERN Open Hardware licence, or - - b) any version of the CERN-OHL-S, or - - c) any licence which permits You to treat the Source to which - it applies as licensed under CERN-OHL-S provided that on - Conveyance of any such Source, or any associated Product You - treat the Source in question as being licensed under - CERN-OHL-S. - - 1.3 'Source' means information such as design materials or digital - code which can be applied to Make or test a Product or to - prepare a Product for use, Conveyance or sale, regardless of its - medium or how it is expressed. It may include Notices. - - 1.4 'Covered Source' means Source that is explicitly made available - under this Licence. - - 1.5 'Product' means any device, component, work or physical object, - whether in finished or intermediate form, arising from the use, - application or processing of Covered Source. - - 1.6 'Make' means to create or configure something, whether by - manufacture, assembly, compiling, loading or applying Covered - Source or another Product or otherwise. - - 1.7 'Available Component' means any part, sub-assembly, library or - code which: - - a) is licensed to You as Complete Source under a Compatible - Licence; or - - b) is available, at the time a Product or the Source containing - it is first Conveyed, to You and any other prospective - licensees - - i) as a physical part with sufficient rights and - information (including any configuration and - programming files and information about its - characteristics and interfaces) to enable it either to - be Made itself, or to be sourced and used to Make the - Product; or - ii) as part of the normal distribution of a tool used to - design or Make the Product. - - 1.8 'Complete Source' means the set of all Source necessary to Make - a Product, in the preferred form for making modifications, - including necessary installation and interfacing information - both for the Product, and for any included Available Components. - If the format is proprietary, it must also be made available in - a format (if the proprietary tool can create it) which is - viewable with a tool available to potential licensees and - licensed under a licence approved by the Free Software - Foundation or the Open Source Initiative. Complete Source need - not include the Source of any Available Component, provided that - You include in the Complete Source sufficient information to - enable a recipient to Make or source and use the Available - Component to Make the Product. - - 1.9 'Source Location' means a location where a Licensor has placed - Covered Source, and which that Licensor reasonably believes will - remain easily accessible for at least three years for anyone to - obtain a digital copy. - - 1.10 'Notice' means copyright, acknowledgement and trademark notices, - Source Location references, modification notices (subsection - 3.3(b)) and all notices that refer to this Licence and to the - disclaimer of warranties that are included in the Covered - Source. - - 1.11 'Licensee' or 'You' means any person exercising rights under - this Licence. - - 1.12 'Licensor' means a natural or legal person who creates or - modifies Covered Source. A person may be a Licensee and a - Licensor at the same time. - - 1.13 'Convey' means to communicate to the public or distribute. - - -2 Applicability - - 2.1 This Licence governs the use, copying, modification, Conveying - of Covered Source and Products, and the Making of Products. By - exercising any right granted under this Licence, You irrevocably - accept these terms and conditions. - - 2.2 This Licence is granted by the Licensor directly to You, and - shall apply worldwide and without limitation in time. - - 2.3 You shall not attempt to restrict by contract or otherwise the - rights granted under this Licence to other Licensees. - - 2.4 This Licence is not intended to restrict fair use, fair dealing, - or any other similar right. - - -3 Copying, modifying and Conveying Covered Source - - 3.1 You may copy and Convey verbatim copies of Covered Source, in - any medium, provided You retain all Notices. - - 3.2 You may modify Covered Source, other than Notices, provided that - You irrevocably undertake to make that modified Covered Source - available from a Source Location should You Convey a Product in - circumstances where the recipient does not otherwise receive a - copy of the modified Covered Source. In each case subsection 3.3 - shall apply. - - You may only delete Notices if they are no longer applicable to - the corresponding Covered Source as modified by You and You may - add additional Notices applicable to Your modifications. - Including Covered Source in a larger work is modifying the - Covered Source, and the larger work becomes modified Covered - Source. - - 3.3 You may Convey modified Covered Source (with the effect that You - shall also become a Licensor) provided that You: - - a) retain Notices as required in subsection 3.2; - - b) add a Notice to the modified Covered Source stating that You - have modified it, with the date and brief description of how - You have modified it; - - c) add a Source Location Notice for the modified Covered Source - if You Convey in circumstances where the recipient does not - otherwise receive a copy of the modified Covered Source; and - - d) license the modified Covered Source under the terms and - conditions of this Licence (or, as set out in subsection - 8.3, a later version, if permitted by the licence of the - original Covered Source). Such modified Covered Source must - be licensed as a whole, but excluding Available Components - contained in it, which remain licensed under their own - applicable licences. - - -4 Making and Conveying Products - -You may Make Products, and/or Convey them, provided that You either -provide each recipient with a copy of the Complete Source or ensure -that each recipient is notified of the Source Location of the Complete -Source. That Complete Source is Covered Source, and You must -accordingly satisfy Your obligations set out in subsection 3.3. If -specified in a Notice, the Product must visibly and securely display -the Source Location on it or its packaging or documentation in the -manner specified in that Notice. - - -5 Research and Development - -You may Convey Covered Source, modified Covered Source or Products to -a legal entity carrying out development, testing or quality assurance -work on Your behalf provided that the work is performed on terms which -prevent the entity from both using the Source or Products for its own -internal purposes and Conveying the Source or Products or any -modifications to them to any person other than You. Any modifications -made by the entity shall be deemed to be made by You pursuant to -subsection 3.2. - - -6 DISCLAIMER AND LIABILITY - - 6.1 DISCLAIMER OF WARRANTY -- The Covered Source and any Products - are provided 'as is' and any express or implied warranties, - including, but not limited to, implied warranties of - merchantability, of satisfactory quality, non-infringement of - third party rights, and fitness for a particular purpose or use - are disclaimed in respect of any Source or Product to the - maximum extent permitted by law. The Licensor makes no - representation that any Source or Product does not or will not - infringe any patent, copyright, trade secret or other - proprietary right. The entire risk as to the use, quality, and - performance of any Source or Product shall be with You and not - the Licensor. This disclaimer of warranty is an essential part - of this Licence and a condition for the grant of any rights - granted under this Licence. - - 6.2 EXCLUSION AND LIMITATION OF LIABILITY -- The Licensor shall, to - the maximum extent permitted by law, have no liability for - direct, indirect, special, incidental, consequential, exemplary, - punitive or other damages of any character including, without - limitation, procurement of substitute goods or services, loss of - use, data or profits, or business interruption, however caused - and on any theory of contract, warranty, tort (including - negligence), product liability or otherwise, arising in any way - in relation to the Covered Source, modified Covered Source - and/or the Making or Conveyance of a Product, even if advised of - the possibility of such damages, and You shall hold the - Licensor(s) free and harmless from any liability, costs, - damages, fees and expenses, including claims by third parties, - in relation to such use. - - -7 Patents - - 7.1 Subject to the terms and conditions of this Licence, each - Licensor hereby grants to You a perpetual, worldwide, - non-exclusive, no-charge, royalty-free, irrevocable (except as - stated in subsections 7.2 and 8.4) patent license to Make, have - Made, use, offer to sell, sell, import, and otherwise transfer - the Covered Source and Products, where such licence applies only - to those patent claims licensable by such Licensor that are - necessarily infringed by exercising rights under the Covered - Source as Conveyed by that Licensor. - - 7.2 If You institute patent litigation against any entity (including - a cross-claim or counterclaim in a lawsuit) alleging that the - Covered Source or a Product constitutes direct or contributory - patent infringement, or You seek any declaration that a patent - licensed to You under this Licence is invalid or unenforceable - then any rights granted to You under this Licence shall - terminate as of the date such process is initiated. - - -8 General - - 8.1 If any provisions of this Licence are or subsequently become - invalid or unenforceable for any reason, the remaining - provisions shall remain effective. - - 8.2 You shall not use any of the name (including acronyms and - abbreviations), image, or logo by which the Licensor or CERN is - known, except where needed to comply with section 3, or where - the use is otherwise allowed by law. Any such permitted use - shall be factual and shall not be made so as to suggest any kind - of endorsement or implication of involvement by the Licensor or - its personnel. - - 8.3 CERN may publish updated versions and variants of this Licence - which it considers to be in the spirit of this version, but may - differ in detail to address new problems or concerns. New - versions will be published with a unique version number and a - variant identifier specifying the variant. If the Licensor has - specified that a given variant applies to the Covered Source - without specifying a version, You may treat that Covered Source - as being released under any version of the CERN-OHL with that - variant. If no variant is specified, the Covered Source shall be - treated as being released under CERN-OHL-S. The Licensor may - also specify that the Covered Source is subject to a specific - version of the CERN-OHL or any later version in which case You - may apply this or any later version of CERN-OHL with the same - variant identifier published by CERN. - - 8.4 This Licence shall terminate with immediate effect if You fail - to comply with any of its terms and conditions. - - 8.5 However, if You cease all breaches of this Licence, then Your - Licence from any Licensor is reinstated unless such Licensor has - terminated this Licence by giving You, while You remain in - breach, a notice specifying the breach and requiring You to cure - it within 30 days, and You have failed to come into compliance - in all material respects by the end of the 30 day period. Should - You repeat the breach after receipt of a cure notice and - subsequent reinstatement, this Licence will terminate - immediately and permanently. Section 6 shall continue to apply - after any termination. - - 8.6 This Licence shall not be enforceable except by a Licensor - acting as such, and third party beneficiary rights are - specifically excluded. diff --git a/LICENSES/CC-BY-SA-4.0.txt b/LICENSE_CC_BY_SA_4.0.txt similarity index 100% rename from LICENSES/CC-BY-SA-4.0.txt rename to LICENSE_CC_BY_SA_4.0.txt diff --git a/build/Anker.pdf b/build/Anker.pdf new file mode 100644 index 0000000..3900bf0 Binary files /dev/null and b/build/Anker.pdf differ diff --git a/build/Ankerdraufsicht.svg b/build/Ankerdraufsicht.svg new file mode 100644 index 0000000..19c7491 --- /dev/null +++ b/build/Ankerdraufsicht.svg @@ -0,0 +1,834 @@ + + + FreeCAD SVG Export + Drawing page: Page003 exported from FreeCAD document: Befestigung_Paneele_OSH + + + + + + + + + image/svg+xml + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + This drawing is our property; it can't be reproduced or communicated without our written consent. + + + A4 + + + + + + + + + + + Designed by Name + + + Date + + + 1/2 + + + Weight + + + myzel-absorber + + + Ankerdraufsicht + + + Drawing number + + + 3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 160 + + + + + + + + + + + + 20 + + + + + + + + + + + + 180 + + + + + + + + + + + + 20 + + + + + + + + + + + + 140 + + + + + + + + + + + + 180 + + + + + + + + + + + + 160 + + + + + + + + + + + + 200 + + + + + + + + + + + + + diff --git a/build/Befestigung_Paneele_OSH.FCStd b/build/Befestigung_Paneele_OSH.FCStd new file mode 100644 index 0000000..50ea077 Binary files /dev/null and b/build/Befestigung_Paneele_OSH.FCStd differ diff --git a/build/Befestigungsleiter.pdf b/build/Befestigungsleiter.pdf new file mode 100644 index 0000000..9a01f69 Binary files /dev/null and b/build/Befestigungsleiter.pdf differ diff --git a/LICENSES/AGPL-3.0-or-later.txt b/build/LICENSES/AGPL-3.0-or-later.txt similarity index 100% rename from LICENSES/AGPL-3.0-or-later.txt rename to build/LICENSES/AGPL-3.0-or-later.txt diff --git a/build/LICENSES/CC-BY-SA-4.0.txt b/build/LICENSES/CC-BY-SA-4.0.txt new file mode 100644 index 0000000..835a683 --- /dev/null +++ b/build/LICENSES/CC-BY-SA-4.0.txt @@ -0,0 +1,170 @@ +Creative Commons Attribution-ShareAlike 4.0 International + + Creative Commons Corporation (“Creative Commons”) is not a law firm and does not provide legal services or legal advice. Distribution of Creative Commons public licenses does not create a lawyer-client or other relationship. Creative Commons makes its licenses and related information available on an “as-is” basis. Creative Commons gives no warranties regarding its licenses, any material licensed under their terms and conditions, or any related information. Creative Commons disclaims all liability for damages resulting from their use to the fullest extent possible. + +Using Creative Commons Public Licenses + +Creative Commons public licenses provide a standard set of terms and conditions that creators and other rights holders may use to share original works of authorship and other material subject to copyright and certain other rights specified in the public license below. The following considerations are for informational purposes only, are not exhaustive, and do not form part of our licenses. + +Considerations for licensors: Our public licenses are intended for use by those authorized to give the public permission to use material in ways otherwise restricted by copyright and certain other rights. Our licenses are irrevocable. Licensors should read and understand the terms and conditions of the license they choose before applying it. Licensors should also secure all rights necessary before applying our licenses so that the public can reuse the material as expected. Licensors should clearly mark any material not subject to the license. This includes other CC-licensed material, or material used under an exception or limitation to copyright. More considerations for licensors. + +Considerations for the public: By using one of our public licenses, a licensor grants the public permission to use the licensed material under specified terms and conditions. If the licensor’s permission is not necessary for any reason–for example, because of any applicable exception or limitation to copyright–then that use is not regulated by the license. Our licenses grant only permissions under copyright and certain other rights that a licensor has authority to grant. Use of the licensed material may still be restricted for other reasons, including because others have copyright or other rights in the material. A licensor may make special requests, such as asking that all changes be marked or described. + +Although not required by our licenses, you are encouraged to respect those requests where reasonable. More considerations for the public. + +Creative Commons Attribution-ShareAlike 4.0 International Public License + +By exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International Public License ("Public License"). To the extent this Public License may be interpreted as a contract, You are granted the Licensed Rights in consideration of Your acceptance of these terms and conditions, and the Licensor grants You such rights in consideration of benefits the Licensor receives from making the Licensed Material available under these terms and conditions. + +Section 1 – Definitions. + + a. Adapted Material means material subject to Copyright and Similar Rights that is derived from or based upon the Licensed Material and in which the Licensed Material is translated, altered, arranged, transformed, or otherwise modified in a manner requiring permission under the Copyright and Similar Rights held by the Licensor. For purposes of this Public License, where the Licensed Material is a musical work, performance, or sound recording, Adapted Material is always produced where the Licensed Material is synched in timed relation with a moving image. + + b. Adapter's License means the license You apply to Your Copyright and Similar Rights in Your contributions to Adapted Material in accordance with the terms and conditions of this Public License. + + c. BY-SA Compatible License means a license listed at creativecommons.org/compatiblelicenses, approved by Creative Commons as essentially the equivalent of this Public License. + + d. Copyright and Similar Rights means copyright and/or similar rights closely related to copyright including, without limitation, performance, broadcast, sound recording, and Sui Generis Database Rights, without regard to how the rights are labeled or categorized. For purposes of this Public License, the rights specified in Section 2(b)(1)-(2) are not Copyright and Similar Rights. + + e. Effective Technological Measures means those measures that, in the absence of proper authority, may not be circumvented under laws fulfilling obligations under Article 11 of the WIPO Copyright Treaty adopted on December 20, 1996, and/or similar international agreements. + + f. Exceptions and Limitations means fair use, fair dealing, and/or any other exception or limitation to Copyright and Similar Rights that applies to Your use of the Licensed Material. + + g. License Elements means the license attributes listed in the name of a Creative Commons Public License. The License Elements of this Public License are Attribution and ShareAlike. + + h. Licensed Material means the artistic or literary work, database, or other material to which the Licensor applied this Public License. + + i. Licensed Rights means the rights granted to You subject to the terms and conditions of this Public License, which are limited to all Copyright and Similar Rights that apply to Your use of the Licensed Material and that the Licensor has authority to license. + + j. Licensor means the individual(s) or entity(ies) granting rights under this Public License. + + k. Share means to provide material to the public by any means or process that requires permission under the Licensed Rights, such as reproduction, public display, public performance, distribution, dissemination, communication, or importation, and to make material available to the public including in ways that members of the public may access the material from a place and at a time individually chosen by them. + + l. Sui Generis Database Rights means rights other than copyright resulting from Directive 96/9/EC of the European Parliament and of the Council of 11 March 1996 on the legal protection of databases, as amended and/or succeeded, as well as other essentially equivalent rights anywhere in the world. + + m. You means the individual or entity exercising the Licensed Rights under this Public License. Your has a corresponding meaning. + +Section 2 – Scope. + + a. License grant. + + 1. Subject to the terms and conditions of this Public License, the Licensor hereby grants You a worldwide, royalty-free, non-sublicensable, non-exclusive, irrevocable license to exercise the Licensed Rights in the Licensed Material to: + + A. reproduce and Share the Licensed Material, in whole or in part; and + + B. produce, reproduce, and Share Adapted Material. + + 2. Exceptions and Limitations. For the avoidance of doubt, where Exceptions and Limitations apply to Your use, this Public License does not apply, and You do not need to comply with its terms and conditions. + + 3. Term. The term of this Public License is specified in Section 6(a). + + 4. Media and formats; technical modifications allowed. The Licensor authorizes You to exercise the Licensed Rights in all media and formats whether now known or hereafter created, and to make technical modifications necessary to do so. The Licensor waives and/or agrees not to assert any right or authority to forbid You from making technical modifications necessary to exercise the Licensed Rights, including technical modifications necessary to circumvent Effective Technological Measures. For purposes of this Public License, simply making modifications authorized by this Section 2(a)(4) never produces Adapted Material. + + 5. Downstream recipients. + + A. Offer from the Licensor – Licensed Material. Every recipient of the Licensed Material automatically receives an offer from the Licensor to exercise the Licensed Rights under the terms and conditions of this Public License. + + B. Additional offer from the Licensor – Adapted Material. Every recipient of Adapted Material from You automatically receives an offer from the Licensor to exercise the Licensed Rights in the Adapted Material under the conditions of the Adapter’s License You apply. + + C. No downstream restrictions. You may not offer or impose any additional or different terms or conditions on, or apply any Effective Technological Measures to, the Licensed Material if doing so restricts exercise of the Licensed Rights by any recipient of the Licensed Material. + + 6. No endorsement. Nothing in this Public License constitutes or may be construed as permission to assert or imply that You are, or that Your use of the Licensed Material is, connected with, or sponsored, endorsed, or granted official status by, the Licensor or others designated to receive attribution as provided in Section 3(a)(1)(A)(i). + + b. Other rights. + + 1. Moral rights, such as the right of integrity, are not licensed under this Public License, nor are publicity, privacy, and/or other similar personality rights; however, to the extent possible, the Licensor waives and/or agrees not to assert any such rights held by the Licensor to the limited extent necessary to allow You to exercise the Licensed Rights, but not otherwise. + + 2. Patent and trademark rights are not licensed under this Public License. + + 3. To the extent possible, the Licensor waives any right to collect royalties from You for the exercise of the Licensed Rights, whether directly or through a collecting society under any voluntary or waivable statutory or compulsory licensing scheme. In all other cases the Licensor expressly reserves any right to collect such royalties. + +Section 3 – License Conditions. + +Your exercise of the Licensed Rights is expressly made subject to the following conditions. + + a. Attribution. + + 1. If You Share the Licensed Material (including in modified form), You must: + + A. retain the following if it is supplied by the Licensor with the Licensed Material: + + i. identification of the creator(s) of the Licensed Material and any others designated to receive attribution, in any reasonable manner requested by the Licensor (including by pseudonym if designated); + + ii. a copyright notice; + + iii. a notice that refers to this Public License; + + iv. a notice that refers to the disclaimer of warranties; + + v. a URI or hyperlink to the Licensed Material to the extent reasonably practicable; + + B. indicate if You modified the Licensed Material and retain an indication of any previous modifications; and + + C. indicate the Licensed Material is licensed under this Public License, and include the text of, or the URI or hyperlink to, this Public License. + + 2. You may satisfy the conditions in Section 3(a)(1) in any reasonable manner based on the medium, means, and context in which You Share the Licensed Material. For example, it may be reasonable to satisfy the conditions by providing a URI or hyperlink to a resource that includes the required information. + + 3. If requested by the Licensor, You must remove any of the information required by Section 3(a)(1)(A) to the extent reasonably practicable. + + b. ShareAlike.In addition to the conditions in Section 3(a), if You Share Adapted Material You produce, the following conditions also apply. + + 1. The Adapter’s License You apply must be a Creative Commons license with the same License Elements, this version or later, or a BY-SA Compatible License. + + 2. You must include the text of, or the URI or hyperlink to, the Adapter's License You apply. You may satisfy this condition in any reasonable manner based on the medium, means, and context in which You Share Adapted Material. + + 3. You may not offer or impose any additional or different terms or conditions on, or apply any Effective Technological Measures to, Adapted Material that restrict exercise of the rights granted under the Adapter's License You apply. + +Section 4 – Sui Generis Database Rights. + +Where the Licensed Rights include Sui Generis Database Rights that apply to Your use of the Licensed Material: + + a. for the avoidance of doubt, Section 2(a)(1) grants You the right to extract, reuse, reproduce, and Share all or a substantial portion of the contents of the database; + + b. if You include all or a substantial portion of the database contents in a database in which You have Sui Generis Database Rights, then the database in which You have Sui Generis Database Rights (but not its individual contents) is Adapted Material, including for purposes of Section 3(b); and + + c. You must comply with the conditions in Section 3(a) if You Share all or a substantial portion of the contents of the database. +For the avoidance of doubt, this Section 4 supplements and does not replace Your obligations under this Public License where the Licensed Rights include other Copyright and Similar Rights. + +Section 5 – Disclaimer of Warranties and Limitation of Liability. + + a. Unless otherwise separately undertaken by the Licensor, to the extent possible, the Licensor offers the Licensed Material as-is and as-available, and makes no representations or warranties of any kind concerning the Licensed Material, whether express, implied, statutory, or other. This includes, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of latent or other defects, accuracy, or the presence or absence of errors, whether or not known or discoverable. Where disclaimers of warranties are not allowed in full or in part, this disclaimer may not apply to You. + + b. To the extent possible, in no event will the Licensor be liable to You on any legal theory (including, without limitation, negligence) or otherwise for any direct, special, indirect, incidental, consequential, punitive, exemplary, or other losses, costs, expenses, or damages arising out of this Public License or use of the Licensed Material, even if the Licensor has been advised of the possibility of such losses, costs, expenses, or damages. Where a limitation of liability is not allowed in full or in part, this limitation may not apply to You. + + c. The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability. + +Section 6 – Term and Termination. + + a. This Public License applies for the term of the Copyright and Similar Rights licensed here. However, if You fail to comply with this Public License, then Your rights under this Public License terminate automatically. + + b. Where Your right to use the Licensed Material has terminated under Section 6(a), it reinstates: + + 1. automatically as of the date the violation is cured, provided it is cured within 30 days of Your discovery of the violation; or + + 2. upon express reinstatement by the Licensor. + + c. For the avoidance of doubt, this Section 6(b) does not affect any right the Licensor may have to seek remedies for Your violations of this Public License. + + d. For the avoidance of doubt, the Licensor may also offer the Licensed Material under separate terms or conditions or stop distributing the Licensed Material at any time; however, doing so will not terminate this Public License. + + e. Sections 1, 5, 6, 7, and 8 survive termination of this Public License. + +Section 7 – Other Terms and Conditions. + + a. The Licensor shall not be bound by any additional or different terms or conditions communicated by You unless expressly agreed. + + b. Any arrangements, understandings, or agreements regarding the Licensed Material not stated herein are separate from and independent of the terms and conditions of this Public License. + +Section 8 – Interpretation. + + a. For the avoidance of doubt, this Public License does not, and shall not be interpreted to, reduce, limit, restrict, or impose conditions on any use of the Licensed Material that could lawfully be made without permission under this Public License. + + b. To the extent possible, if any provision of this Public License is deemed unenforceable, it shall be automatically reformed to the minimum extent necessary to make it enforceable. If the provision cannot be reformed, it shall be severed from this Public License without affecting the enforceability of the remaining terms and conditions. + + c. No term or condition of this Public License will be waived and no failure to comply consented to unless expressly agreed to by the Licensor. + + d. Nothing in this Public License constitutes or may be interpreted as a limitation upon, or waiver of, any privileges and immunities that apply to the Licensor or You, including from the legal processes of any jurisdiction or authority. + +Creative Commons is not a party to its public licenses. Notwithstanding, Creative Commons may elect to apply one of its public licenses to material it publishes and in those instances will be considered the “Licensor.” Except for the limited purpose of indicating that material is shared under a Creative Commons public license or as otherwise permitted by the Creative Commons policies published at creativecommons.org/policies, Creative Commons does not authorize the use of the trademark “Creative Commons” or any other trademark or logo of Creative Commons without its prior written consent including, without limitation, in connection with any unauthorized modifications to any of its public licenses or any other arrangements, understandings, or agreements concerning use of licensed material. For the avoidance of doubt, this paragraph does not form part of the public licenses. + +Creative Commons may be contacted at creativecommons.org. diff --git a/LICENSES/CERN-OHL-S-2.0.txt b/build/LICENSES/CERN-OHL-S-2.0.txt similarity index 100% rename from LICENSES/CERN-OHL-S-2.0.txt rename to build/LICENSES/CERN-OHL-S-2.0.txt diff --git a/LICENSES/README.md b/build/LICENSES/README.md similarity index 100% rename from LICENSES/README.md rename to build/LICENSES/README.md diff --git a/LICENSES/Unlicense.txt b/build/LICENSES/Unlicense.txt similarity index 100% rename from LICENSES/Unlicense.txt rename to build/LICENSES/Unlicense.txt diff --git a/build/Lasercut_Deckel_1.svg b/build/Lasercut_Deckel_1.svg new file mode 100644 index 0000000..5e814ac --- /dev/null +++ b/build/Lasercut_Deckel_1.svg @@ -0,0 +1,76 @@ + + + + + + + + + + + + + diff --git a/build/Lasercut_Deckel_Quer.svg b/build/Lasercut_Deckel_Quer.svg new file mode 100644 index 0000000..4e74816 --- /dev/null +++ b/build/Lasercut_Deckel_Quer.svg @@ -0,0 +1,74 @@ + + + + + + + + + + + + + + diff --git a/doc/README.md b/build/doc/README.md similarity index 100% rename from doc/README.md rename to build/doc/README.md diff --git a/build/doc/assembly/README.md b/build/doc/assembly/README.md index 4cbdd87..9130b29 100644 --- a/build/doc/assembly/README.md +++ b/build/doc/assembly/README.md @@ -1,4 +1,11 @@ -# README `build/doc/assembly/` +# README `doc/assembly/` -null +Assembly instructions manual sources - Assembly means: You have all the parts available (bought, printed, milled, ...), and now want to put them together. So this is like a LEGO or IKEA manual. See also: doc/manuf/. + +Hier steht eine Beschreibung, wie man etwas ganz geheimes verstecken kann: +
CLICK ME +Dieser Text wurde versteckt +
+ +Hat es funktioniert? diff --git a/doc/assembly/chap-1/sec-1.md b/build/doc/assembly/chap-1/sec-1.md similarity index 100% rename from doc/assembly/chap-1/sec-1.md rename to build/doc/assembly/chap-1/sec-1.md diff --git a/doc/assembly/chap-1/sec-2.md b/build/doc/assembly/chap-1/sec-2.md similarity index 100% rename from doc/assembly/chap-1/sec-2.md rename to build/doc/assembly/chap-1/sec-2.md diff --git a/doc/assembly/main.md b/build/doc/assembly/main.md similarity index 100% rename from doc/assembly/main.md rename to build/doc/assembly/main.md diff --git a/doc/assembly/vf_recipe.ttl b/build/doc/assembly/vf_recipe.ttl similarity index 100% rename from doc/assembly/vf_recipe.ttl rename to build/doc/assembly/vf_recipe.ttl diff --git a/build/doc/manuf/README.md b/build/doc/manuf/README.md index da9af5a..76af0b0 100644 --- a/build/doc/manuf/README.md +++ b/build/doc/manuf/README.md @@ -1,4 +1,4 @@ -# README `build/doc/manuf/` +# README `doc/manuf/` -null +Manufacturing instructions manual sources - Manufacturing means: Details about how to get from the sources under src/elec/ and src/mech/ to the actual parts, so this contains the meta-data about, and describes the process of 3D-printing, milling, carving, ... the individual parts. See also: doc/assembly/. diff --git a/doc/manuf/chap-1/sec-1.md b/build/doc/manuf/chap-1/sec-1.md similarity index 100% rename from doc/manuf/chap-1/sec-1.md rename to build/doc/manuf/chap-1/sec-1.md diff --git a/doc/manuf/chap-1/sec-2.md b/build/doc/manuf/chap-1/sec-2.md similarity index 100% rename from doc/manuf/chap-1/sec-2.md rename to build/doc/manuf/chap-1/sec-2.md diff --git a/doc/manuf/main.md b/build/doc/manuf/main.md similarity index 100% rename from doc/manuf/main.md rename to build/doc/manuf/main.md diff --git a/build/doc/recycling/README.md b/build/doc/recycling/README.md index 8d62f8d..38d6629 100644 --- a/build/doc/recycling/README.md +++ b/build/doc/recycling/README.md @@ -1,4 +1,4 @@ -# README `build/doc/recycling/` +# README `doc/recycling/` -null +Recycling instructions sources diff --git a/doc/recycling/chap-1/sec-1.md b/build/doc/recycling/chap-1/sec-1.md similarity index 100% rename from doc/recycling/chap-1/sec-1.md rename to build/doc/recycling/chap-1/sec-1.md diff --git a/doc/recycling/chap-1/sec-2.md b/build/doc/recycling/chap-1/sec-2.md similarity index 100% rename from doc/recycling/chap-1/sec-2.md rename to build/doc/recycling/chap-1/sec-2.md diff --git a/doc/recycling/main.md b/build/doc/recycling/main.md similarity index 100% rename from doc/recycling/main.md rename to build/doc/recycling/main.md diff --git a/build/doc/usr/README.md b/build/doc/usr/README.md index 8b26f5e..87ce888 100644 --- a/build/doc/usr/README.md +++ b/build/doc/usr/README.md @@ -1,4 +1,4 @@ -# README `build/doc/usr/` +# README `doc/usr/` -null +User manual (aka operation, repair & maintenance instructions -> split up?) sources diff --git a/doc/usr/chap-1/sec-1.md b/build/doc/usr/chap-1/sec-1.md similarity index 100% rename from doc/usr/chap-1/sec-1.md rename to build/doc/usr/chap-1/sec-1.md diff --git a/doc/usr/chap-1/sec-2.md b/build/doc/usr/chap-1/sec-2.md similarity index 100% rename from doc/usr/chap-1/sec-2.md rename to build/doc/usr/chap-1/sec-2.md diff --git a/doc/usr/main.md b/build/doc/usr/main.md similarity index 100% rename from doc/usr/main.md rename to build/doc/usr/main.md diff --git a/doc/workshops/README.md b/build/doc/workshops/README.md similarity index 100% rename from doc/workshops/README.md rename to build/doc/workshops/README.md diff --git a/doc/workshops/build/main.md b/build/doc/workshops/build/main.md similarity index 100% rename from doc/workshops/build/main.md rename to build/doc/workshops/build/main.md diff --git a/res/media/README.md b/build/media/README.md similarity index 100% rename from res/media/README.md rename to build/media/README.md diff --git a/res/media/img/README.md b/build/media/img/README.md similarity index 100% rename from res/media/img/README.md rename to build/media/img/README.md diff --git a/res/media/img/diagram-1.svg b/build/media/img/diagram-1.svg similarity index 100% rename from res/media/img/diagram-1.svg rename to build/media/img/diagram-1.svg diff --git a/res/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg b/build/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg similarity index 100% rename from res/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg rename to build/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg diff --git a/res/media/img/wip/readme.md b/build/media/img/wip/readme.md similarity index 100% rename from res/media/img/wip/readme.md rename to build/media/img/wip/readme.md diff --git a/res/README.md b/build/res/README.md similarity index 100% rename from res/README.md rename to build/res/README.md diff --git a/res/assets/README.md b/build/res/assets/README.md similarity index 100% rename from res/assets/README.md rename to build/res/assets/README.md diff --git a/res/assets/media/README.md b/build/res/assets/media/README.md similarity index 100% rename from res/assets/media/README.md rename to build/res/assets/media/README.md diff --git a/res/assets/media/img/README.md b/build/res/assets/media/img/README.md similarity index 100% rename from res/assets/media/img/README.md rename to build/res/assets/media/img/README.md diff --git a/res/assets/media/img/animation-1.gif b/build/res/assets/media/img/animation-1.gif similarity index 100% rename from res/assets/media/img/animation-1.gif rename to build/res/assets/media/img/animation-1.gif diff --git a/res/assets/media/img/drawing-1.png b/build/res/assets/media/img/drawing-1.png similarity index 100% rename from res/assets/media/img/drawing-1.png rename to build/res/assets/media/img/drawing-1.png diff --git a/res/assets/media/img/photo_2021-11-09 14.35.25.jpeg b/build/res/assets/media/img/photo_2021-11-09 14.35.25.jpeg similarity index 100% rename from res/assets/media/img/photo_2021-11-09 14.35.25.jpeg rename to build/res/assets/media/img/photo_2021-11-09 14.35.25.jpeg diff --git a/res/assets/media/img/screenshot-1.jpg b/build/res/assets/media/img/screenshot-1.jpg similarity index 100% rename from res/assets/media/img/screenshot-1.jpg rename to build/res/assets/media/img/screenshot-1.jpg diff --git a/res/assets/media/vid/README.md b/build/res/assets/media/vid/README.md similarity index 100% rename from res/assets/media/vid/README.md rename to build/res/assets/media/vid/README.md diff --git a/res/assets/media/vid/tutorial.webm b/build/res/assets/media/vid/tutorial.webm similarity index 100% rename from res/assets/media/vid/tutorial.webm rename to build/res/assets/media/vid/tutorial.webm diff --git a/res/assets/var/README.md b/build/res/assets/var/README.md similarity index 100% rename from res/assets/var/README.md rename to build/res/assets/var/README.md diff --git a/res/assets/var/datasheet-x.pdf b/build/res/assets/var/datasheet-x.pdf similarity index 100% rename from res/assets/var/datasheet-x.pdf rename to build/res/assets/var/datasheet-x.pdf diff --git a/res/conf/README.md b/build/res/conf/README.md similarity index 100% rename from res/conf/README.md rename to build/res/conf/README.md diff --git a/res/conf/some-config.xml b/build/res/conf/some-config.xml similarity index 100% rename from res/conf/some-config.xml rename to build/res/conf/some-config.xml diff --git a/build/res/media/README.md b/build/res/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/build/res/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/build/res/media/img/README.md b/build/res/media/img/README.md new file mode 100644 index 0000000..424f1dd --- /dev/null +++ b/build/res/media/img/README.md @@ -0,0 +1,4 @@ +# README `res/media/img/` + +Non-binary (and usually rather small) images go here. + diff --git a/build/res/media/img/diagram-1.svg b/build/res/media/img/diagram-1.svg new file mode 100644 index 0000000..4c2e521 --- /dev/null +++ b/build/res/media/img/diagram-1.svg @@ -0,0 +1,38 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/build/res/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg b/build/res/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg new file mode 100644 index 0000000..59e809b Binary files /dev/null and b/build/res/media/img/wip/BigRep-Blade-infill-20-Screenshot.jpg differ diff --git a/build/res/media/img/wip/readme.md b/build/res/media/img/wip/readme.md new file mode 100644 index 0000000..4b39212 --- /dev/null +++ b/build/res/media/img/wip/readme.md @@ -0,0 +1,5 @@ +# Work in Progress + +Bilder für die Kommunikation innerhalb von code.curious.bio/felix/myzel-akustikabsorber + +*Dieser Ordner wird zum Finalisieren des Projektes gelöscht* \ No newline at end of file diff --git a/src/README.md b/build/src/README.md similarity index 100% rename from src/README.md rename to build/src/README.md diff --git a/src/anim/README.md b/build/src/anim/README.md similarity index 100% rename from src/anim/README.md rename to build/src/anim/README.md diff --git a/src/anim/assembly.blend b/build/src/anim/assembly.blend similarity index 100% rename from src/anim/assembly.blend rename to build/src/anim/assembly.blend diff --git a/src/calc/README.md b/build/src/calc/README.md similarity index 100% rename from src/calc/README.md rename to build/src/calc/README.md diff --git a/src/calc/feedback-evaluation.ods b/build/src/calc/feedback-evaluation.ods similarity index 100% rename from src/calc/feedback-evaluation.ods rename to build/src/calc/feedback-evaluation.ods diff --git a/src/calc/required-material-thickness.m b/build/src/calc/required-material-thickness.m similarity index 100% rename from src/calc/required-material-thickness.m rename to build/src/calc/required-material-thickness.m diff --git a/src/elec/README.md b/build/src/elec/README.md similarity index 100% rename from src/elec/README.md rename to build/src/elec/README.md diff --git a/src/elec/main-subs/README.md b/build/src/elec/main-subs/README.md similarity index 100% rename from src/elec/main-subs/README.md rename to build/src/elec/main-subs/README.md diff --git a/src/elec/main-subs/parts.lib b/build/src/elec/main-subs/parts.lib similarity index 100% rename from src/elec/main-subs/parts.lib rename to build/src/elec/main-subs/parts.lib diff --git a/src/elec/main-subs/sub-a.kicad_pcb b/build/src/elec/main-subs/sub-a.kicad_pcb similarity index 100% rename from src/elec/main-subs/sub-a.kicad_pcb rename to build/src/elec/main-subs/sub-a.kicad_pcb diff --git a/src/elec/main-subs/sub-a.pro b/build/src/elec/main-subs/sub-a.pro similarity index 100% rename from src/elec/main-subs/sub-a.pro rename to build/src/elec/main-subs/sub-a.pro diff --git a/src/elec/main-subs/sub-a.sch b/build/src/elec/main-subs/sub-a.sch similarity index 100% rename from src/elec/main-subs/sub-a.sch rename to build/src/elec/main-subs/sub-a.sch diff --git a/src/elec/main-subs/sub-b.kicad_pcb b/build/src/elec/main-subs/sub-b.kicad_pcb similarity index 100% rename from src/elec/main-subs/sub-b.kicad_pcb rename to build/src/elec/main-subs/sub-b.kicad_pcb diff --git a/src/elec/main-subs/sub-b.pro b/build/src/elec/main-subs/sub-b.pro similarity index 100% rename from src/elec/main-subs/sub-b.pro rename to build/src/elec/main-subs/sub-b.pro diff --git a/src/elec/main-subs/sub-b.sch b/build/src/elec/main-subs/sub-b.sch similarity index 100% rename from src/elec/main-subs/sub-b.sch rename to build/src/elec/main-subs/sub-b.sch diff --git a/src/elec/main.kicad_pcb b/build/src/elec/main.kicad_pcb similarity index 100% rename from src/elec/main.kicad_pcb rename to build/src/elec/main.kicad_pcb diff --git a/src/elec/main.pro b/build/src/elec/main.pro similarity index 100% rename from src/elec/main.pro rename to build/src/elec/main.pro diff --git a/src/elec/main.sch b/build/src/elec/main.sch similarity index 100% rename from src/elec/main.sch rename to build/src/elec/main.sch diff --git a/src/elec/plate.kicad_pcb b/build/src/elec/plate.kicad_pcb similarity index 100% rename from src/elec/plate.kicad_pcb rename to build/src/elec/plate.kicad_pcb diff --git a/src/elec/plate.pro b/build/src/elec/plate.pro similarity index 100% rename from src/elec/plate.pro rename to build/src/elec/plate.pro diff --git a/src/elec/plate.sch b/build/src/elec/plate.sch similarity index 100% rename from src/elec/plate.sch rename to build/src/elec/plate.sch diff --git a/src/firmware/Makefile b/build/src/firmware/Makefile similarity index 100% rename from src/firmware/Makefile rename to build/src/firmware/Makefile diff --git a/src/firmware/README.md b/build/src/firmware/README.md similarity index 100% rename from src/firmware/README.md rename to build/src/firmware/README.md diff --git a/src/firmware/main.c b/build/src/firmware/main.c similarity index 100% rename from src/firmware/main.c rename to build/src/firmware/main.c diff --git a/src/firmware/other.c b/build/src/firmware/other.c similarity index 100% rename from src/firmware/other.c rename to build/src/firmware/other.c diff --git a/src/firmware/other.h b/build/src/firmware/other.h similarity index 100% rename from src/firmware/other.h rename to build/src/firmware/other.h diff --git a/build/src/mech/MycoLutions-FC-5.4-BigRep-hohl.stl b/build/src/mech/MycoLutions-FC-5.4-BigRep-hohl.stl new file mode 100644 index 0000000..98c9426 Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-BigRep-hohl.stl differ diff --git a/build/src/mech/MycoLutions-FC-5.4-BigRep-voll.stl b/build/src/mech/MycoLutions-FC-5.4-BigRep-voll.stl new file mode 100644 index 0000000..2e56a97 Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-BigRep-voll.stl differ diff --git a/build/src/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl new file mode 100644 index 0000000..fa04cc9 Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl differ diff --git a/build/src/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl new file mode 100644 index 0000000..78a7dec Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl differ diff --git a/build/src/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl new file mode 100644 index 0000000..66a99ab Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl differ diff --git a/build/src/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl new file mode 100644 index 0000000..3912dbf Binary files /dev/null and b/build/src/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl differ diff --git a/src/mech/README.md b/build/src/mech/README.md similarity index 100% rename from src/mech/README.md rename to build/src/mech/README.md diff --git a/src/mech/case-alternative.fcstd b/build/src/mech/case-alternative.fcstd similarity index 100% rename from src/mech/case-alternative.fcstd rename to build/src/mech/case-alternative.fcstd diff --git a/src/mech/case.fcstd b/build/src/mech/case.fcstd similarity index 100% rename from src/mech/case.fcstd rename to build/src/mech/case.fcstd diff --git a/src/mech/parts.lib b/build/src/mech/parts.lib similarity index 100% rename from src/mech/parts.lib rename to build/src/mech/parts.lib diff --git a/src/mech/pieceX.scad b/build/src/mech/pieceX.scad similarity index 100% rename from src/mech/pieceX.scad rename to build/src/mech/pieceX.scad diff --git a/src/sim/README.md b/build/src/sim/README.md similarity index 100% rename from src/sim/README.md rename to build/src/sim/README.md diff --git a/src/sim/stress-test.OpenFOAM b/build/src/sim/stress-test.OpenFOAM similarity index 100% rename from src/sim/stress-test.OpenFOAM rename to build/src/sim/stress-test.OpenFOAM diff --git a/src/software/README.md b/build/src/software/README.md similarity index 100% rename from src/software/README.md rename to build/src/software/README.md diff --git a/src/software/control_lib/Cargo.toml b/build/src/software/control_lib/Cargo.toml similarity index 100% rename from src/software/control_lib/Cargo.toml rename to build/src/software/control_lib/Cargo.toml diff --git a/src/software/control_lib/src/main.rs b/build/src/software/control_lib/src/main.rs similarity index 100% rename from src/software/control_lib/src/main.rs rename to build/src/software/control_lib/src/main.rs diff --git a/src/test/README.md b/build/src/test/README.md similarity index 100% rename from src/test/README.md rename to build/src/test/README.md diff --git a/doc/assembly/README.md b/doc/assembly/README.md index 84b9ddf..9130b29 100644 --- a/doc/assembly/README.md +++ b/doc/assembly/README.md @@ -2,3 +2,10 @@ Assembly instructions manual sources - Assembly means: You have all the parts available (bought, printed, milled, ...), and now want to put them together. So this is like a LEGO or IKEA manual. See also: doc/manuf/. +Hier steht eine Beschreibung, wie man etwas ganz geheimes verstecken kann: +
CLICK ME +Dieser Text wurde versteckt +
+ +Hat es funktioniert? + diff --git a/doc/manuf/README.md b/doc/manuf/README.md deleted file mode 100644 index 76af0b0..0000000 --- a/doc/manuf/README.md +++ /dev/null @@ -1,4 +0,0 @@ -# README `doc/manuf/` - -Manufacturing instructions manual sources - Manufacturing means: Details about how to get from the sources under src/elec/ and src/mech/ to the actual parts, so this contains the meta-data about, and describes the process of 3D-printing, milling, carving, ... the individual parts. See also: doc/assembly/. - diff --git a/doc/recycling/README.md b/doc/recycling/README.md deleted file mode 100644 index 38d6629..0000000 --- a/doc/recycling/README.md +++ /dev/null @@ -1,4 +0,0 @@ -# README `doc/recycling/` - -Recycling instructions sources - diff --git a/doc/usr/README.md b/doc/usr/README.md deleted file mode 100644 index 87ce888..0000000 --- a/doc/usr/README.md +++ /dev/null @@ -1,4 +0,0 @@ -# README `doc/usr/` - -User manual (aka operation, repair & maintenance instructions -> split up?) sources - diff --git a/media/README.md b/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/mod/anchor/README.md b/mod/anchor/README.md new file mode 100644 index 0000000..e1d8b6c --- /dev/null +++ b/mod/anchor/README.md @@ -0,0 +1,5 @@ +# README `mod/module-a/` + +mv module-a Substrate +null + diff --git a/mod/anchor/bom.csv b/mod/anchor/bom.csv new file mode 100644 index 0000000..edecc2d --- /dev/null +++ b/mod/anchor/bom.csv @@ -0,0 +1,28 @@ +POS NAME UNITS TYPE REFERENCE +1 threaded rod M8 2 STD DIN 795 M8 x 180 +2 M8 Nuts 4 STD ISO 4032 M8 +3 M8 Nuts with Rubber 2 STD ISO 7040 M8 +4 M6 Nuts 4 STD ISO 4032 M6 +5 M6 Cylinder Screw 4 STD ISO 8677 M6 x 70 +6 W60x4 Wood Screw 8 STD DIN 7997 4 x 60 +7 W35x4 Wood Screw 4 STD DIN 7997 4 x 35 +8 W12x4 Wood Screw 16 STD DIN 7997 4 x 12 +9 Ratchet Wheel 2 POSH /3DParts/RatchetWheel/okh-RatchetWheel.json +10 Clamp Ring 2 POSH /3DParts/ClampRing/okh-ClampRing.json +11 Comb Module 5 POSH /3DParts/CombModul/okh-CombModul.json +12 Ratchet Pawl 2 POSH /3DParts/RatchetPawl/okh-RatchetPawl.json +13 Screw Socket w 12 POSH /3DParts/ScrewSockets/okh-ScrewSockets.json +14 Screw Socket w/o 4 POSH /3DParts/ScrewSockets/okh-ScrewSocket4ScrewHead.json +15 Outer Warpcloth Beam (4 parts each) 2 POSH +15.1 Warpclothbeam_P1 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P1.json +15.2 Warpclothbeam_P2 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P2.json +15.3 Warpclothbeam_P3 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P3.json +15.4 Warpclothbeam_P4 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P4.json +16 Comb Holder 2 POSH /WoodParts/CombHolder/okh-CombHolder.json +17 Side Frame 2 POSH /WoodParts/SideFrame/okh-SideFrame.json +18 Cross Beam 2 POSH /WoodParts/CrossBeam/okh-CrossBeam.json +19 Slot Beam 2 POSH /WoodParts/SlotBeam/okh-SlotBeam.json +20 String Stick 2 POSH /WoodParts/StringStick/okh-StringStick.json +21 Shuttle 1 POSH /WoodParts/Shuttle/okh-Shuttle.json +22 Inner Warpcloth Beam 2 POSH /WoodParts/WarpClothBeam_NoCNC/WarpClothBeam.json +23 3m String 1 BUY ⌀2…3 mm, Polypropylen diff --git a/mod/anchor/media/README.md b/mod/anchor/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/mod/anchor/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/mod/material_fabrication/README.md b/mod/material_fabrication/README.md index 3f04f0c..62d08e4 100644 --- a/mod/material_fabrication/README.md +++ b/mod/material_fabrication/README.md @@ -1,4 +1,99 @@ -# README `mod/module-b/` +# README `mod/material_fabrication/` -null +# Benötigte Materialien: +- Rapsstroh [Bild von Rapsstroh] +- Buchweizenschalen [Bild von Buchweizenschalen] +- Autoklavbeutel [Bild von Autoklavbeutel] +- Wasser +- Körnerbrut der Reishi-Kultur (Kulrurbezeichnung) +- Wachstumsform +# Benötigte Geräte und Utensilien: +- Substratwaage [Bild von Substratwaage] +- Messbecher/ Messzylinder +- Substratmischer [Bild von Substratmischer] +- Maurerkelle +- Autoklav +- Laminarströmungsabzug [Bild von Flowhood] +- Impulsschweißgerät +- Hechsler für Substrat [Bild von Hechsler] +- temperaturkontrolliertes Wachstumszelt [Bild von Growzelt] + +# Arbeitsaufwand: +Der Arbeitsaufwand richtet sich stark nach dem Umfang und dem Volumen der herzustellenden Körper. +Bei manueller Herstellung der Substratmischung erhöht sich der Arbeitsaufwand mit erhöhtem Volumen zunehmend. + +# Herstellung +Die Herstellung eines Myzel-Kompositmaterials läuft in mehreren Teilschritten ab und wird in folgenden Kategorien beschrieben: +Details hierzu lassen sich im Dokument "Mind the fungi" (Quelle) finden. + +### - Substrat-Pilz-Kombination +### - Formbefüllung +### - Nachbehandlung + +# Substrat + +Für die Substratmischung wird je nach Art der Ausgangsmaterialien ein individuelles Rezept benötigt. Da unterschiedliche Substrate verschiedene Wasserhaltekapazitäten besitzen, wird die hinzuzufügende Menge Wasser immer vor Ort und auf Grundlage der aktuellen Restfeuchte der Substrate bestimmt. + +--- +### Berechnen der Größen: + +--- +1. **Bestimmen des benötigten Gesamtvolumens und der Gesamtmasse** +

Je Form ist ein Volumen von rund 10 Litern angegeben. Durch verschiedene Prozessschritte ist ein gewisser Schwund zu erwarten. Deswegen sollte ein Puffer von ca. 10% eingeplant werden. Mit entsprechender Dichte des Substratgemischs lässt sich nun das benötigte Gewicht der hydrierten Gesamtmasse bestimmen.
+
+Dichte Buchweizenschalen/Rapsstroh 50/50 % (hydriert): ~ 450 g/L
+
+Rechnung:
+10 L x 6 = 60 L
+60 L * 1,1 = 66 L mit Puffer
+66 L * 450 g/L = 29.700 g Gesamtmasse hydriert
+

+ +--- +2. **Bestimmen der Gesamtmasse des trockenen Substrats** +

Das Gewicht der hydrierten Masse wird auf die jeweiligen Trockenmassen heruntergerechnet
+
+Wasserspeicherkapazität Buchweizenschalen: 59%
+Wasserspeicherkapazität Rapsstroh: 75%
+
+Rechnung:
+29.700 g / 2 = 14.850 g je Substrat
+
+Buchweizenschalen:
+14.850 g * 0,59 = 8.761,5 g Wasser
+14.850 g - 8.761,5 g = 6088,5 g Buchweizenschalen trocken
+Rapsstroh:
+14.850 g * 0,75 = 11.137,5 g Wasser
+14.850 g - 11.137,5 g = 3.712,5 g Rapsstroh trocken
+

+ +--- +3. Die **benötigte Gesamtwassermenge** leitet sich aus der Rechnung aus 2. ab. +

8.761,5 g + 11.137,5 g = 19.899 g -> 19,9 L Wasser

+ +--- +### Substrat anmischen: +1. Abwiegen der Substrate +2. Messen der Wassermenge +3. Im Substratmischer Substrat mit entsprechender Wassermenge mindestens 30 Minuten homogenisieren und hydrieren, mit heißem Wasser geht dieser Prozess besser + +### Schritt 3 - Vorbereitung zum Autoklavieren: + +1. Abfüllen des Substrates in Autoklavbeutel (a 2,4 Kg) +2. Komprimierung und doppeltes Falten der offenen Beutel (Pasteursche Schleife) + +### Schritt 4 - Autoklaviervorgang: + +1. Befüllen der Korbeinsätze des Autoklavs mit Faltöffnung nach innen zeigend +2. 4 Beutel pro Korb -> 8 Beutel pro Autoklavdurchlauf +3. Starten des Autoklavs (121 °C, 15 psi, 90 Minuten) +4. Abkühlen über Nacht, Substrat muss vor Beimpfen eine Kerntemperatur von unter 30 °C haben + + +# Sicherheitshinweise +Bei der Nutzung des Autoklavs sind alle vom Hersteller angegebenen Sicherheitsbestimmungen einzuhalten. Bei der Benutzung von Hochdruckbehältern, welche auf bis zu 121 °C aufgeheizt werden, ist auf besondere Sorgfalt zu achten. Der Betrieb ist nur nach erfolgter Sicherheitseinweisung und mit Schutzausrüstung zulässig. +Zur Schutzbekleidung gehören: +- festes Schuhwerk +- Schutzbrille +- Sicherheitshandschuhe \ No newline at end of file diff --git a/mod/material_fabrication/bom.csv b/mod/material_fabrication/bom.csv new file mode 100644 index 0000000..edecc2d --- /dev/null +++ b/mod/material_fabrication/bom.csv @@ -0,0 +1,28 @@ +POS NAME UNITS TYPE REFERENCE +1 threaded rod M8 2 STD DIN 795 M8 x 180 +2 M8 Nuts 4 STD ISO 4032 M8 +3 M8 Nuts with Rubber 2 STD ISO 7040 M8 +4 M6 Nuts 4 STD ISO 4032 M6 +5 M6 Cylinder Screw 4 STD ISO 8677 M6 x 70 +6 W60x4 Wood Screw 8 STD DIN 7997 4 x 60 +7 W35x4 Wood Screw 4 STD DIN 7997 4 x 35 +8 W12x4 Wood Screw 16 STD DIN 7997 4 x 12 +9 Ratchet Wheel 2 POSH /3DParts/RatchetWheel/okh-RatchetWheel.json +10 Clamp Ring 2 POSH /3DParts/ClampRing/okh-ClampRing.json +11 Comb Module 5 POSH /3DParts/CombModul/okh-CombModul.json +12 Ratchet Pawl 2 POSH /3DParts/RatchetPawl/okh-RatchetPawl.json +13 Screw Socket w 12 POSH /3DParts/ScrewSockets/okh-ScrewSockets.json +14 Screw Socket w/o 4 POSH /3DParts/ScrewSockets/okh-ScrewSocket4ScrewHead.json +15 Outer Warpcloth Beam (4 parts each) 2 POSH +15.1 Warpclothbeam_P1 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P1.json +15.2 Warpclothbeam_P2 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P2.json +15.3 Warpclothbeam_P3 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P3.json +15.4 Warpclothbeam_P4 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P4.json +16 Comb Holder 2 POSH /WoodParts/CombHolder/okh-CombHolder.json +17 Side Frame 2 POSH /WoodParts/SideFrame/okh-SideFrame.json +18 Cross Beam 2 POSH /WoodParts/CrossBeam/okh-CrossBeam.json +19 Slot Beam 2 POSH /WoodParts/SlotBeam/okh-SlotBeam.json +20 String Stick 2 POSH /WoodParts/StringStick/okh-StringStick.json +21 Shuttle 1 POSH /WoodParts/Shuttle/okh-Shuttle.json +22 Inner Warpcloth Beam 2 POSH /WoodParts/WarpClothBeam_NoCNC/WarpClothBeam.json +23 3m String 1 BUY ⌀2…3 mm, Polypropylen diff --git a/mod/material_fabrication/media/README.md b/mod/material_fabrication/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/mod/material_fabrication/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/mod/mould/casting_from_3D_positive_mould/README.md b/mod/mould/casting_from_3D_positive_mould/README.md new file mode 100644 index 0000000..3f04f0c --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/README.md @@ -0,0 +1,4 @@ +# README `mod/module-b/` + +null + diff --git a/mod/mould/casting_from_3D_positive_mould/bom.csv b/mod/mould/casting_from_3D_positive_mould/bom.csv new file mode 100644 index 0000000..edecc2d --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/bom.csv @@ -0,0 +1,28 @@ +POS NAME UNITS TYPE REFERENCE +1 threaded rod M8 2 STD DIN 795 M8 x 180 +2 M8 Nuts 4 STD ISO 4032 M8 +3 M8 Nuts with Rubber 2 STD ISO 7040 M8 +4 M6 Nuts 4 STD ISO 4032 M6 +5 M6 Cylinder Screw 4 STD ISO 8677 M6 x 70 +6 W60x4 Wood Screw 8 STD DIN 7997 4 x 60 +7 W35x4 Wood Screw 4 STD DIN 7997 4 x 35 +8 W12x4 Wood Screw 16 STD DIN 7997 4 x 12 +9 Ratchet Wheel 2 POSH /3DParts/RatchetWheel/okh-RatchetWheel.json +10 Clamp Ring 2 POSH /3DParts/ClampRing/okh-ClampRing.json +11 Comb Module 5 POSH /3DParts/CombModul/okh-CombModul.json +12 Ratchet Pawl 2 POSH /3DParts/RatchetPawl/okh-RatchetPawl.json +13 Screw Socket w 12 POSH /3DParts/ScrewSockets/okh-ScrewSockets.json +14 Screw Socket w/o 4 POSH /3DParts/ScrewSockets/okh-ScrewSocket4ScrewHead.json +15 Outer Warpcloth Beam (4 parts each) 2 POSH +15.1 Warpclothbeam_P1 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P1.json +15.2 Warpclothbeam_P2 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P2.json +15.3 Warpclothbeam_P3 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P3.json +15.4 Warpclothbeam_P4 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P4.json +16 Comb Holder 2 POSH /WoodParts/CombHolder/okh-CombHolder.json +17 Side Frame 2 POSH /WoodParts/SideFrame/okh-SideFrame.json +18 Cross Beam 2 POSH /WoodParts/CrossBeam/okh-CrossBeam.json +19 Slot Beam 2 POSH /WoodParts/SlotBeam/okh-SlotBeam.json +20 String Stick 2 POSH /WoodParts/StringStick/okh-StringStick.json +21 Shuttle 1 POSH /WoodParts/Shuttle/okh-Shuttle.json +22 Inner Warpcloth Beam 2 POSH /WoodParts/WarpClothBeam_NoCNC/WarpClothBeam.json +23 3m String 1 BUY ⌀2…3 mm, Polypropylen diff --git a/mod/mould/casting_from_3D_positive_mould/conf/README.md b/mod/mould/casting_from_3D_positive_mould/conf/README.md new file mode 100644 index 0000000..aa70e3b --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/conf/README.md @@ -0,0 +1,4 @@ +# README `res/conf/` + +Configuration & settings files, e.g. 3D printer settings, log settings, ... + diff --git a/mod/mould/casting_from_3D_positive_mould/conf/some-config.xml b/mod/mould/casting_from_3D_positive_mould/conf/some-config.xml new file mode 100644 index 0000000..e7ef482 --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/conf/some-config.xml @@ -0,0 +1,15 @@ + + + + + + + + + + + + + + + diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl new file mode 100644 index 0000000..98c9426 Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl new file mode 100644 index 0000000..2e56a97 Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl new file mode 100644 index 0000000..fa04cc9 Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl new file mode 100644 index 0000000..78a7dec Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl new file mode 100644 index 0000000..66a99ab Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl new file mode 100644 index 0000000..3912dbf Binary files /dev/null and b/mod/mould/casting_from_3D_positive_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl differ diff --git a/mod/mould/casting_from_3D_positive_mould/mech/README.md b/mod/mould/casting_from_3D_positive_mould/mech/README.md new file mode 100644 index 0000000..a8d89e8 --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/mech/README.md @@ -0,0 +1,4 @@ +# README `src/mech/` + +Mechanical "blueprints" - Computer Aided Design (CAD) files + diff --git a/mod/mould/casting_from_3D_positive_mould/mech/case-alternative.fcstd b/mod/mould/casting_from_3D_positive_mould/mech/case-alternative.fcstd new file mode 100644 index 0000000..e69de29 diff --git a/mod/mould/casting_from_3D_positive_mould/mech/case.fcstd b/mod/mould/casting_from_3D_positive_mould/mech/case.fcstd new file mode 100644 index 0000000..e69de29 diff --git a/assembly.vf_recipe.ttl b/mod/mould/casting_from_3D_positive_mould/mech/parts.lib similarity index 100% rename from assembly.vf_recipe.ttl rename to mod/mould/casting_from_3D_positive_mould/mech/parts.lib diff --git a/mod/mould/casting_from_3D_positive_mould/mech/pieceX.scad b/mod/mould/casting_from_3D_positive_mould/mech/pieceX.scad new file mode 100644 index 0000000..d233d82 --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/mech/pieceX.scad @@ -0,0 +1,57 @@ +// SPDX-FileCopyrightText: 2021 Jens Meisner +// +// SPDX-License-Identifier: CC-BY-SA-4.0 + +/*File Info-------------------------------------------------------------------- +File Name: PoleBase.scad +Project Name: OpenHardware LOOM - OHLOOM +License: Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) +Name: Jens Meisner +Date: 08/01/20 +Desc: This file is part of the OHLOOM Project. Original design by Oliver Slueter, who made all wooden parts without a CNC Router. https://wiki.opensourceecology.de/Open_Hardware-Webstuhl_%E2%80%93_OHLOOM +Usage: +./OHLoom_Documentation/Assembly_Guide/AssemblyGuide.md +./OHLoom_Documentation/User_Guide/OHLOOM_UserGuide.md +/* +/*Modifications------------------------------------------------------------ +New File Name: Enter name, if it has changed +Name: Enter name of author +Date: +Desc: Describe changes of the original design +*/ +//Please continue with any fur enter any further modification here +//-------------------------------------------------------------------------------- + +d1=47; //outer diameter +d2=37; //inner diameter +h1=100; //cylinder height +h2=5; //base thickness + +union() +{ + hull() + { + translate([-d2/4,-d2*1.8,0]) + cylinder(h=h2,d=d2); + translate([d2/4,-d2*1.8,0]) + cylinder(h=h2,d=d2); + translate([-d2,d2/1.5,0]) + cylinder(h=h2,d=d2); + translate([d2,d2/1.5,0]) + cylinder(h=h2,d=d2); + } + difference() + { + union() + { + cylinder(h=h1,d=d1); + translate([0,h2/2,d1/2]) + rotate([90,30,0]) + cylinder(h=h2,d=d1*1.8,$fn=3); + translate([h2/2,0,d1/2]) + rotate([90,30,-90]) + cylinder(h=h2,d=d1*1.8,$fn=3); + } + cylinder(h=h1,d=d2); + } +} \ No newline at end of file diff --git a/mod/mould/casting_from_3D_positive_mould/media/README.md b/mod/mould/casting_from_3D_positive_mould/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/mod/mould/casting_from_3D_positive_mould/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/mod/mould/direct_3D_negative_mould/README.md b/mod/mould/direct_3D_negative_mould/README.md new file mode 100644 index 0000000..3f04f0c --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/README.md @@ -0,0 +1,4 @@ +# README `mod/module-b/` + +null + diff --git a/mod/mould/direct_3D_negative_mould/bom.csv b/mod/mould/direct_3D_negative_mould/bom.csv new file mode 100644 index 0000000..edecc2d --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/bom.csv @@ -0,0 +1,28 @@ +POS NAME UNITS TYPE REFERENCE +1 threaded rod M8 2 STD DIN 795 M8 x 180 +2 M8 Nuts 4 STD ISO 4032 M8 +3 M8 Nuts with Rubber 2 STD ISO 7040 M8 +4 M6 Nuts 4 STD ISO 4032 M6 +5 M6 Cylinder Screw 4 STD ISO 8677 M6 x 70 +6 W60x4 Wood Screw 8 STD DIN 7997 4 x 60 +7 W35x4 Wood Screw 4 STD DIN 7997 4 x 35 +8 W12x4 Wood Screw 16 STD DIN 7997 4 x 12 +9 Ratchet Wheel 2 POSH /3DParts/RatchetWheel/okh-RatchetWheel.json +10 Clamp Ring 2 POSH /3DParts/ClampRing/okh-ClampRing.json +11 Comb Module 5 POSH /3DParts/CombModul/okh-CombModul.json +12 Ratchet Pawl 2 POSH /3DParts/RatchetPawl/okh-RatchetPawl.json +13 Screw Socket w 12 POSH /3DParts/ScrewSockets/okh-ScrewSockets.json +14 Screw Socket w/o 4 POSH /3DParts/ScrewSockets/okh-ScrewSocket4ScrewHead.json +15 Outer Warpcloth Beam (4 parts each) 2 POSH +15.1 Warpclothbeam_P1 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P1.json +15.2 Warpclothbeam_P2 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P2.json +15.3 Warpclothbeam_P3 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P3.json +15.4 Warpclothbeam_P4 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P4.json +16 Comb Holder 2 POSH /WoodParts/CombHolder/okh-CombHolder.json +17 Side Frame 2 POSH /WoodParts/SideFrame/okh-SideFrame.json +18 Cross Beam 2 POSH /WoodParts/CrossBeam/okh-CrossBeam.json +19 Slot Beam 2 POSH /WoodParts/SlotBeam/okh-SlotBeam.json +20 String Stick 2 POSH /WoodParts/StringStick/okh-StringStick.json +21 Shuttle 1 POSH /WoodParts/Shuttle/okh-Shuttle.json +22 Inner Warpcloth Beam 2 POSH /WoodParts/WarpClothBeam_NoCNC/WarpClothBeam.json +23 3m String 1 BUY ⌀2…3 mm, Polypropylen diff --git a/mod/mould/direct_3D_negative_mould/conf/README.md b/mod/mould/direct_3D_negative_mould/conf/README.md new file mode 100644 index 0000000..aa70e3b --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/conf/README.md @@ -0,0 +1,4 @@ +# README `res/conf/` + +Configuration & settings files, e.g. 3D printer settings, log settings, ... + diff --git a/mod/mould/direct_3D_negative_mould/conf/some-config.xml b/mod/mould/direct_3D_negative_mould/conf/some-config.xml new file mode 100644 index 0000000..e7ef482 --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/conf/some-config.xml @@ -0,0 +1,15 @@ + + + + + + + + + + + + + + + diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl new file mode 100644 index 0000000..98c9426 Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-hohl.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl new file mode 100644 index 0000000..2e56a97 Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-BigRep-voll.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl new file mode 100644 index 0000000..fa04cc9 Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-1-4.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl new file mode 100644 index 0000000..78a7dec Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-2-4.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl new file mode 100644 index 0000000..66a99ab Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-3-4.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl new file mode 100644 index 0000000..3912dbf Binary files /dev/null and b/mod/mould/direct_3D_negative_mould/mech/MycoLutions-FC-5.4-Ultimaker-4-4.stl differ diff --git a/mod/mould/direct_3D_negative_mould/mech/README.md b/mod/mould/direct_3D_negative_mould/mech/README.md new file mode 100644 index 0000000..a8d89e8 --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/mech/README.md @@ -0,0 +1,4 @@ +# README `src/mech/` + +Mechanical "blueprints" - Computer Aided Design (CAD) files + diff --git a/mod/mould/direct_3D_negative_mould/mech/case-alternative.fcstd b/mod/mould/direct_3D_negative_mould/mech/case-alternative.fcstd new file mode 100644 index 0000000..e69de29 diff --git a/mod/mould/direct_3D_negative_mould/mech/case.fcstd b/mod/mould/direct_3D_negative_mould/mech/case.fcstd new file mode 100644 index 0000000..e69de29 diff --git a/manuf.vf_recipe.ttl b/mod/mould/direct_3D_negative_mould/mech/parts.lib similarity index 100% rename from manuf.vf_recipe.ttl rename to mod/mould/direct_3D_negative_mould/mech/parts.lib diff --git a/mod/mould/direct_3D_negative_mould/mech/pieceX.scad b/mod/mould/direct_3D_negative_mould/mech/pieceX.scad new file mode 100644 index 0000000..d233d82 --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/mech/pieceX.scad @@ -0,0 +1,57 @@ +// SPDX-FileCopyrightText: 2021 Jens Meisner +// +// SPDX-License-Identifier: CC-BY-SA-4.0 + +/*File Info-------------------------------------------------------------------- +File Name: PoleBase.scad +Project Name: OpenHardware LOOM - OHLOOM +License: Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) +Name: Jens Meisner +Date: 08/01/20 +Desc: This file is part of the OHLOOM Project. Original design by Oliver Slueter, who made all wooden parts without a CNC Router. https://wiki.opensourceecology.de/Open_Hardware-Webstuhl_%E2%80%93_OHLOOM +Usage: +./OHLoom_Documentation/Assembly_Guide/AssemblyGuide.md +./OHLoom_Documentation/User_Guide/OHLOOM_UserGuide.md +/* +/*Modifications------------------------------------------------------------ +New File Name: Enter name, if it has changed +Name: Enter name of author +Date: +Desc: Describe changes of the original design +*/ +//Please continue with any fur enter any further modification here +//-------------------------------------------------------------------------------- + +d1=47; //outer diameter +d2=37; //inner diameter +h1=100; //cylinder height +h2=5; //base thickness + +union() +{ + hull() + { + translate([-d2/4,-d2*1.8,0]) + cylinder(h=h2,d=d2); + translate([d2/4,-d2*1.8,0]) + cylinder(h=h2,d=d2); + translate([-d2,d2/1.5,0]) + cylinder(h=h2,d=d2); + translate([d2,d2/1.5,0]) + cylinder(h=h2,d=d2); + } + difference() + { + union() + { + cylinder(h=h1,d=d1); + translate([0,h2/2,d1/2]) + rotate([90,30,0]) + cylinder(h=h2,d=d1*1.8,$fn=3); + translate([h2/2,0,d1/2]) + rotate([90,30,-90]) + cylinder(h=h2,d=d1*1.8,$fn=3); + } + cylinder(h=h1,d=d2); + } +} \ No newline at end of file diff --git a/mod/mould/direct_3D_negative_mould/media/README.md b/mod/mould/direct_3D_negative_mould/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/mod/mould/direct_3D_negative_mould/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/mod/mounting_system/bom.csv b/mod/mounting_system/bom.csv new file mode 100644 index 0000000..edecc2d --- /dev/null +++ b/mod/mounting_system/bom.csv @@ -0,0 +1,28 @@ +POS NAME UNITS TYPE REFERENCE +1 threaded rod M8 2 STD DIN 795 M8 x 180 +2 M8 Nuts 4 STD ISO 4032 M8 +3 M8 Nuts with Rubber 2 STD ISO 7040 M8 +4 M6 Nuts 4 STD ISO 4032 M6 +5 M6 Cylinder Screw 4 STD ISO 8677 M6 x 70 +6 W60x4 Wood Screw 8 STD DIN 7997 4 x 60 +7 W35x4 Wood Screw 4 STD DIN 7997 4 x 35 +8 W12x4 Wood Screw 16 STD DIN 7997 4 x 12 +9 Ratchet Wheel 2 POSH /3DParts/RatchetWheel/okh-RatchetWheel.json +10 Clamp Ring 2 POSH /3DParts/ClampRing/okh-ClampRing.json +11 Comb Module 5 POSH /3DParts/CombModul/okh-CombModul.json +12 Ratchet Pawl 2 POSH /3DParts/RatchetPawl/okh-RatchetPawl.json +13 Screw Socket w 12 POSH /3DParts/ScrewSockets/okh-ScrewSockets.json +14 Screw Socket w/o 4 POSH /3DParts/ScrewSockets/okh-ScrewSocket4ScrewHead.json +15 Outer Warpcloth Beam (4 parts each) 2 POSH +15.1 Warpclothbeam_P1 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P1.json +15.2 Warpclothbeam_P2 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P2.json +15.3 Warpclothbeam_P3 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P3.json +15.4 Warpclothbeam_P4 1 POSH /3DParts/WarpClothBeam/okh-Warpclothbeam_P4.json +16 Comb Holder 2 POSH /WoodParts/CombHolder/okh-CombHolder.json +17 Side Frame 2 POSH /WoodParts/SideFrame/okh-SideFrame.json +18 Cross Beam 2 POSH /WoodParts/CrossBeam/okh-CrossBeam.json +19 Slot Beam 2 POSH /WoodParts/SlotBeam/okh-SlotBeam.json +20 String Stick 2 POSH /WoodParts/StringStick/okh-StringStick.json +21 Shuttle 1 POSH /WoodParts/Shuttle/okh-Shuttle.json +22 Inner Warpcloth Beam 2 POSH /WoodParts/WarpClothBeam_NoCNC/WarpClothBeam.json +23 3m String 1 BUY ⌀2…3 mm, Polypropylen diff --git a/mod/mounting_system/media/README.md b/mod/mounting_system/media/README.md new file mode 100644 index 0000000..27caaee --- /dev/null +++ b/mod/mounting_system/media/README.md @@ -0,0 +1,4 @@ +# README `res/media/` + +Non-binary (and usually rather small) media goes here. Media are (mainly) images, audio recordings and videos. + diff --git a/recycle.vf_recipe.ttl b/recycle.vf_recipe.ttl deleted file mode 100644 index 8b13789..0000000 --- a/recycle.vf_recipe.ttl +++ /dev/null @@ -1 +0,0 @@ - diff --git a/run/README.md b/run/README.md deleted file mode 100644 index 50d80e0..0000000 --- a/run/README.md +++ /dev/null @@ -1,4 +0,0 @@ -# README `run/` - -Project maintenance scripts, preferably platform independent - diff --git a/run/build b/run/build deleted file mode 100644 index 6221ef1..0000000 --- a/run/build +++ /dev/null @@ -1 +0,0 @@ -cd src/software/control_lib/; cargo build --release diff --git a/run/ci b/run/ci deleted file mode 100644 index 63ab0a3..0000000 --- a/run/ci +++ /dev/null @@ -1 +0,0 @@ -apt-get install cargo; run/build diff --git a/run/clean b/run/clean deleted file mode 100644 index 8b13789..0000000 --- a/run/clean +++ /dev/null @@ -1 +0,0 @@ - diff --git a/run/release b/run/release deleted file mode 100644 index 8b13789..0000000 --- a/run/release +++ /dev/null @@ -1 +0,0 @@ - diff --git a/run/test b/run/test deleted file mode 100644 index 8b13789..0000000 --- a/run/test +++ /dev/null @@ -1 +0,0 @@ -