2023-01-12 10:17:45 +01:00
18 changed files with 0 additions and 7 deletions
--- a/mod/mould/README.md
+++ b/mod/mould/README.md
@ -12,13 +12,8 @@ Der Vorteil dieses zweiteiligen Aufbaus ist die Möglichkeit, das Design mit CAD
 ---
 1. ### Drucken einer Positiv Form mit 3D Drucker und anschließender Gipsabformung
 (Bild Lukas)
 Syntax: mould_cast_negative.webp
 2. ### direkter 3D Druck der Negativform
 (Bild Lukas)
 Syntax: mould_3d_negative.webp
 ---
 ## Wahl der Wachstumsbox
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_insert.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_insert.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_negative.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_negative.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_parts.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_parts.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_pour.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_pour.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_boxcut.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_boxcut.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_clamp.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_clamp.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_screws.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_screws.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_stand.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_prep_stand.webp
--- a/mod/mould/casting_from_3D_positive_mould/media/mould_cast_set.webp
+++ b/mod/mould/casting_from_3D_positive_mould/media/mould_cast_set.webp
--- a/mod/mould/direct_3D_negative_mould/README.md
+++ b/mod/mould/direct_3D_negative_mould/README.md
@ -20,8 +20,6 @@ Eine gedruckte Negativform kann direkt in die Wachstumsbox eingesetzt werden und
 Daten für Ultimaker 2 und BigRep liegt im ...
 Der Ultimaker Druck besteht aus Vier teilen, der vom BigRep aus einem Teil ...
 (Illustration)
 Syntax: mould_3d_parts.webp
 ### 2. Einsetzen der Negativform in die Wachstumsbox 
--- a/mod/mould/direct_3D_negative_mould/media/mould_3d_insert.webp
+++ b/mod/mould/direct_3D_negative_mould/media/mould_3d_insert.webp
--- a/mod/mould/direct_3D_negative_mould/media/mould_3d_negative.webp
+++ b/mod/mould/direct_3D_negative_mould/media/mould_3d_negative.webp
--- a/mod/mould/direct_3D_negative_mould/media/mould_3d_parts.webp
+++ b/mod/mould/direct_3D_negative_mould/media/mould_3d_parts.webp
--- a/mod/mould/direct_3D_negative_mould/media/mould_3d_prep_screws.webp
+++ b/mod/mould/direct_3D_negative_mould/media/mould_3d_prep_screws.webp
--- a/mod/mould/direct_3D_negative_mould/media/mould_3d_set.webp
+++ b/mod/mould/direct_3D_negative_mould/media/mould_3d_set.webp