moved documentation over

This commit is contained in:
simonox 2023-02-26 18:29:17 +01:00
parent c294e74f44
commit aadbf625a6
11 changed files with 2 additions and 61 deletions

BIN
.DS_Store vendored

Binary file not shown.

View file

@ -84,68 +84,9 @@ const char* ssid = "MeinKabelWifi";
const char* password = "letMeIn123"; const char* password = "letMeIn123";
``` ```
## Tasmota ## Tasmota and MQTT
[Tasmota](https://tasmota.github.io/docs/) is an alternative Firmware for ESP8266. It's easy to use as it has a graphical interface. We can use this sensor in our [IoT-Platform](../iot-platform/). Have a look in that repository.
You can flash Tasmota right from the browser using the [Tasmota Web Installer](https://tasmota.github.io/).
![Flash it](./tasmota/01-flash-1.png)
You have to connect your device with a USB cable and select the right port. Exisisting firmware will be delete.
![Erase everything](./tasmota/02-flash-2.png)
After Tasmota has been flashed to your ESP, you can already set up your wifi.
![Set up Wifi](./tasmota/03-wifi.png)
AFter your device is connected to Wifi, you can switch over to the web UI of your device. Yes, your device now runs an embedded web server. There you can configure your device.
![Embedded web server](./tasmota/04-web-ui.png)
### Configure
Using this Web UI you can configure your device: `Configure -> Configure Module`
Our Wemos D1 mini clone is a `generic device with 18 ports`. We have a DHT11 connected to D1 and an analogue measurement on A0.
![Basic configuration](./tasmota/05-configuration.png)
After configuring it this way, we can see you data in the web UI.
![Flash it](./tasmota/06-overview.png)
### MQTT
Tasmota's main protocol is MQTT. You can setup MQTT under `Configuration -> MQTT`.
![MQTT](./tasmota/07-setup-mqtt.png)
There you can setup use our [IoT-Platform](../iot-platform) to send data over to it.
The send data more frequent (nice for debugging) you have to change the telemetry period to a lower leven (than 300 s / 5 min).
![Telemetry interval](./tasmota/08-configure-telemetry-interval.png)
Then our device will send data like this:
```
{
"Time": "2023-02-26T17:19:55",
"ANALOG": {
"A0": 6
},
"DHT11": {
"Temperature": 19,
"Humidity": 44,
"DewPoint": 6.4
},
"TempUnit": "C"
}
```
## ESPHome ## ESPHome

BIN
tasmota/.DS_Store vendored

Binary file not shown.

Binary file not shown.

Before

Width:  |  Height:  |  Size: 115 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 122 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 129 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 96 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 181 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 82 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 127 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 113 KiB