planktoscope/docs/01_hardware/chapter_3.md

33 lines
838 B
Markdown
Raw Normal View History

2022-12-17 20:33:50 +01:00
# Chapter 3
## Notes
| Topic | Description |
| --------- | ----------- |
| **Time** | |
| **Tools** | |
| **Parts** | |
## Screw the four **Standoffs** into **Part A**
👁 Grab the **Part A**.
🟣 Locate the **four holes** on **Part A**.
🟢 **A1. Standoff M2.5 - 6mm**- Brass
🟢 **B4**. Wrenches for standoffs
🟣 Place the Standoff M2.5 - 6mm in the small side of the wrenches for
standoffs B4.
🟠 Do not use the big side of the wrenches for standoffs since the standoff will be loose in it.
Place the standoff in the hole and start rotating **by hand** in a clockwise direction until secure.
Then tighten with the wrench.
✅ Make sure to screw until the standoff is properly inserted in the hole.
❌ Do not stop screwing before.
Keep going for each of the **four holes**.