2021-07-01 18:19:32 +02:00
|
|
|
#!/bin/bash
|
2021-11-03 18:05:42 +01:00
|
|
|
#version 0.961-N/HS-I-PlanktonPlanet
|
2021-07-01 18:19:32 +02:00
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
#changes by PlanktonPlanet includes the following:
|
|
|
|
#- formatting and shellcheck validation
|
|
|
|
#- removal of ip forwarding setup
|
|
|
|
|
|
|
|
#You may share this script on the condition a reference to RaspberryConnect.com
|
|
|
|
#must be included in copies or derivatives of this script.
|
2021-07-01 18:19:32 +02:00
|
|
|
|
|
|
|
#Network Wifi & Hotspot with Internet
|
|
|
|
#A script to switch between a wifi network and an Internet routed Hotspot
|
|
|
|
#A Raspberry Pi with a network port required for Internet in hotspot mode.
|
|
|
|
#Works at startup or with a seperate timer or manually without a reboot
|
|
|
|
#Other setup required find out more at
|
|
|
|
#http://www.raspberryconnect.com
|
|
|
|
|
|
|
|
wifidev="wlan0" #device name to use. Default is wlan0.
|
2021-11-03 18:05:42 +01:00
|
|
|
ethdev="eth0" #Ethernet port to use with IP tables
|
|
|
|
#use the command: iw dev ,to see wifi interface name
|
2021-07-01 18:19:32 +02:00
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
#These two lines capture the wifi networks the RPi is setup to use
|
|
|
|
wpassid=$(awk '/ssid="/{ print $0 }' /etc/wpa_supplicant/wpa_supplicant.conf | awk -F'ssid=' '{ print $2 }' | sed 's/\r//g' | awk 'BEGIN{ORS=","} {print}' | sed 's/\"/''/g' | sed 's/,$//')
|
|
|
|
IFS="," read -r -a ssids <<<"$wpassid"
|
2021-07-01 18:19:32 +02:00
|
|
|
|
|
|
|
#Note:If you only want to check for certain SSIDs
|
|
|
|
#Remove the # in in front of ssids=('mySSID1'.... below and put a # infront of all four lines above
|
|
|
|
# separated by a space, eg ('mySSID1' 'mySSID2')
|
|
|
|
#ssids=('mySSID1' 'mySSID2' 'mySSID3')
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
#Enter the Routers Mac Addresses for hidden SSIDs, seperated by spaces ie
|
|
|
|
#( '11:22:33:44:55:66' 'aa:bb:cc:dd:ee:ff' )
|
2021-07-01 18:19:32 +02:00
|
|
|
mac=()
|
|
|
|
|
|
|
|
ssidsmac=("${ssids[@]}" "${mac[@]}") #combines ssid and MAC for checking
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
createAdHocNetwork() {
|
|
|
|
echo "Creating Hotspot"
|
|
|
|
ip link set dev "$wifidev" down
|
|
|
|
ip a add 192.168.4.1/24 brd + dev "$wifidev"
|
|
|
|
ip link set dev "$wifidev" up
|
|
|
|
dhcpcd -k "$wifidev" >/dev/null 2>&1
|
|
|
|
systemctl start dnsmasq
|
|
|
|
systemctl start hostapd
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
KillHotspot() {
|
|
|
|
echo "Shutting Down Hotspot"
|
|
|
|
ip link set dev "$wifidev" down
|
|
|
|
systemctl stop hostapd
|
|
|
|
systemctl stop dnsmasq
|
|
|
|
ip addr flush dev "$wifidev"
|
|
|
|
ip link set dev "$wifidev" up
|
|
|
|
dhcpcd -n "$wifidev" >/dev/null 2>&1
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
ChkWifiUp() {
|
|
|
|
echo "Checking WiFi connection ok"
|
|
|
|
sleep 20 #give time for connection to be completed to router
|
|
|
|
if ! wpa_cli -i "$wifidev" status | grep 'ip_address' >/dev/null 2>&1; then #Failed to connect to wifi (check your wifi settings, password etc)
|
|
|
|
echo 'Wifi failed to connect, falling back to Hotspot.'
|
|
|
|
wpa_cli terminate "$wifidev" >/dev/null 2>&1
|
|
|
|
createAdHocNetwork
|
|
|
|
fi
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
chksys() {
|
|
|
|
#After some system updates hostapd gets masked using Raspbian Buster, and above. This checks and fixes
|
|
|
|
#the issue and also checks dnsmasq is ok so the hotspot can be generated.
|
|
|
|
#Check Hostapd is unmasked and disabled
|
|
|
|
if systemctl -all list-unit-files hostapd.service | grep "hostapd.service masked" >/dev/null 2>&1; then
|
|
|
|
systemctl unmask hostapd.service >/dev/null 2>&1
|
|
|
|
fi
|
|
|
|
if systemctl -all list-unit-files hostapd.service | grep "hostapd.service enabled" >/dev/null 2>&1; then
|
|
|
|
systemctl disable hostapd.service >/dev/null 2>&1
|
|
|
|
systemctl stop hostapd >/dev/null 2>&1
|
|
|
|
fi
|
|
|
|
#Check dnsmasq is disabled
|
|
|
|
if systemctl -all list-unit-files dnsmasq.service | grep "dnsmasq.service masked" >/dev/null 2>&1; then
|
|
|
|
systemctl unmask dnsmasq >/dev/null 2>&1
|
|
|
|
fi
|
|
|
|
if systemctl -all list-unit-files dnsmasq.service | grep "dnsmasq.service enabled" >/dev/null 2>&1; then
|
|
|
|
systemctl disable dnsmasq >/dev/null 2>&1
|
|
|
|
systemctl stop dnsmasq >/dev/null 2>&1
|
|
|
|
fi
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
FindSSID() {
|
|
|
|
#Check to see what SSID's and MAC addresses are in range
|
|
|
|
ssidChk='NoSSid'
|
|
|
|
i=0
|
|
|
|
j=0
|
|
|
|
until [ $i -eq 1 ]; do #wait for wifi if busy, usb wifi is slower.
|
|
|
|
ssidreply=$( (iw dev "$wifidev" scan ap-force | grep -E "^BSS|SSID:") 2>&1) >/dev/null 2>&1
|
|
|
|
#echo "SSid's in range: " $ssidreply
|
|
|
|
printf '%s\n' "${ssidreply[@]}"
|
|
|
|
echo "Device Available Check try " $j
|
|
|
|
if ((j >= 5)); then #if busy 5 times goto hotspot
|
|
|
|
echo "Device busy or unavailable 5 times, going to Hotspot"
|
|
|
|
ssidreply=""
|
|
|
|
i=1
|
|
|
|
elif echo "$ssidreply" | grep "No such device (-19)" >/dev/null 2>&1; then
|
|
|
|
echo "No Device Reported, try " $j
|
|
|
|
NoDevice
|
|
|
|
elif echo "$ssidreply" | grep "Network is down (-100)" >/dev/null 2>&1; then
|
|
|
|
echo "Network Not available, trying again" $j
|
|
|
|
j=$((j + 1))
|
|
|
|
sleep 2
|
|
|
|
elif echo "$ssidreply" | grep "Read-only file system (-30)" >/dev/null 2>&1; then
|
|
|
|
echo "Temporary Read only file system, trying again"
|
|
|
|
j=$((j + 1))
|
|
|
|
sleep 2
|
|
|
|
elif echo "$ssidreply" | grep "Invalid exchange (-52)" >/dev/null 2>&1; then
|
|
|
|
echo "Temporary unavailable, trying again"
|
|
|
|
j=$((j + 1))
|
|
|
|
sleep 2
|
|
|
|
elif echo "$ssidreply" | grep -v "resource busy (-16)" >/dev/null 2>&1; then
|
|
|
|
echo "Device Available, checking SSid Results"
|
|
|
|
i=1
|
|
|
|
else #see if device not busy in 2 seconds
|
|
|
|
echo "Device unavailable checking again, try " $j
|
|
|
|
j=$((j + 1))
|
|
|
|
sleep 2
|
|
|
|
fi
|
|
|
|
done
|
|
|
|
|
|
|
|
for ssid in "${ssidsmac[@]}"; do
|
|
|
|
if (echo "$ssidreply" | grep -F -- "$ssid") >/dev/null 2>&1; then
|
|
|
|
#Valid SSid found, passing to script
|
|
|
|
echo "Valid SSID Detected, assesing Wifi status"
|
|
|
|
ssidChk=$ssid
|
|
|
|
return 0
|
|
|
|
else
|
|
|
|
#No Network found, NoSSid issued"
|
|
|
|
echo "No SSid found, assessing WiFi status"
|
|
|
|
ssidChk='NoSSid'
|
|
|
|
fi
|
|
|
|
done
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
2021-11-03 18:05:42 +01:00
|
|
|
NoDevice() {
|
|
|
|
#if no wifi device,ie usb wifi removed, activate wifi so when it is
|
|
|
|
#reconnected wifi to a router will be available
|
|
|
|
echo "No wifi device connected"
|
|
|
|
wpa_supplicant -B -i "$wifidev" -c /etc/wpa_supplicant/wpa_supplicant.conf >/dev/null 2>&1
|
|
|
|
exit 1
|
2021-07-01 18:19:32 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
chksys
|
|
|
|
FindSSID
|
|
|
|
|
|
|
|
#Create Hotspot or connect to valid wifi networks
|
2021-11-03 18:05:42 +01:00
|
|
|
if [ "$ssidChk" != "NoSSid" ]; then
|
|
|
|
if systemctl status hostapd | grep "(running)" >/dev/null 2>&1; then #hotspot running and ssid in range
|
2021-07-01 18:19:32 +02:00
|
|
|
KillHotspot
|
|
|
|
echo "Hotspot Deactivated, Bringing Wifi Up"
|
|
|
|
wpa_supplicant -B -i "$wifidev" -c /etc/wpa_supplicant/wpa_supplicant.conf >/dev/null 2>&1
|
|
|
|
ChkWifiUp
|
2021-11-03 18:05:42 +01:00
|
|
|
elif { wpa_cli -i "$wifidev" status | grep 'ip_address'; } >/dev/null 2>&1; then #Already connected
|
2021-07-01 18:19:32 +02:00
|
|
|
echo "Wifi already connected to a network"
|
|
|
|
else #ssid exists and no hotspot running connect to wifi network
|
|
|
|
echo "Connecting to the WiFi Network"
|
|
|
|
wpa_supplicant -B -i "$wifidev" -c /etc/wpa_supplicant/wpa_supplicant.conf >/dev/null 2>&1
|
|
|
|
ChkWifiUp
|
|
|
|
fi
|
|
|
|
else #ssid or MAC address not in range
|
2021-11-03 18:05:42 +01:00
|
|
|
if systemctl status hostapd | grep "(running)" >/dev/null 2>&1; then
|
2021-07-01 18:19:32 +02:00
|
|
|
echo "Hostspot already active"
|
2021-11-03 18:05:42 +01:00
|
|
|
elif { wpa_cli status | grep "$wifidev"; } >/dev/null 2>&1; then
|
2021-07-01 18:19:32 +02:00
|
|
|
echo "Cleaning wifi files and Activating Hotspot"
|
|
|
|
wpa_cli terminate >/dev/null 2>&1
|
|
|
|
ip addr flush "$wifidev"
|
|
|
|
ip link set dev "$wifidev" down
|
2021-11-03 18:05:42 +01:00
|
|
|
# ip addr flush "$ethdev"
|
|
|
|
# ip link set dev "$ethdev" down
|
2021-07-01 18:19:32 +02:00
|
|
|
rm -r /var/run/wpa_supplicant >/dev/null 2>&1
|
|
|
|
createAdHocNetwork
|
|
|
|
else #"No SSID, activating Hotspot"
|
|
|
|
createAdHocNetwork
|
|
|
|
fi
|
|
|
|
fi
|