59 lines
1.2 KiB
Markdown
59 lines
1.2 KiB
Markdown
|
# Chapter 8
|
||
|
|
|
||
|
|
## Notes
|
||
|
|
|
||
|
|
| Topic | Description |
|
||
|
|
| --------- | ----------- |
|
||
|
|
| **Time** | |
|
||
|
|
| **Tools** | |
|
||
|
|
| **Parts** | |
|
||
|
|
|
||
|
|
## Mount the PlanktoScope HAT on the Raspberry Pi
|
||
|
|
|
||
|
|
### Locate
|
||
|
|
|
||
|
|
Locate the **PlanktoScope HAT** present in **bag I**.
|
||
|
|
|
||
|
|
### Ribbon cable
|
||
|
|
|
||
|
|
🔴Thread the **Ribbon cable** through the **PlanktoScope HAT** slot from the
|
||
|
|
underside.
|
||
|
|
|
||
|
|
!!! warning
|
||
|
|
|
||
|
|
⚠ Make sure the two 🟣black connectors are aligned before threading through the ribbon.
|
||
|
|
|
||
|
|
### Plug
|
||
|
|
|
||
|
|
Plug the **PlanktoScope HAT** into the **Raspberry Pi**.
|
||
|
|
|
||
|
|
!!! warning
|
||
|
|
|
||
|
|
⚠ Make sure the two black connectors are aligned before attaching them together.
|
||
|
|
|
||
|
|
### Connect
|
||
|
|
|
||
|
|
Press the **PlanktoScope HAT** against the **Raspberry Pi** until it is no longer possible to move them closer together.
|
||
|
|
|
||
|
|
!!! warning
|
||
|
|
|
||
|
|
⚠ Continue to feed through the Ribbon Cable and do not crush it while pressing the PlanktoScope HAT against the standoffs.
|
||
|
|
|
||
|
|
---
|
||
|
|
|
||
|
|
🟠 **A4**. Screw **M2.5X5mm** CHC - SS
|
||
|
|
|
||
|
|
---
|
||
|
|
|
||
|
|
🟣 Locate the 4 holes on the top of the **PlanktoScope HAT** and insert the four **M2.5X5mm**
|
||
|
|
|
||
|
|
---
|
||
|
|
|
||
|
|
🟡 **B3**. Allen key 2mm
|
||
|
|
|
||
|
|
---
|
||
|
|
|
||
|
|
Screw the four **A4** screws through the **PlanktoScope HAT** onto the **Standoff M2.5 - 16mm**.
|
||
|
|
|
||
|
|
🎬 Store this assembly for later.
|