docs: assembly, add information about steppers and their wiring

This commit is contained in:
Romain Bazile 2021-03-11 12:42:17 +01:00
parent 25c02fbf29
commit 14d4cc5f5e

View file

@ -138,6 +138,13 @@ Your setup should look like this. Don't worry about the wiring, we'll have a loo
You will now want to wire the steppers and pump to the terminals on the motor driver board. You will now want to wire the steppers and pump to the terminals on the motor driver board.
!!! info
The PlanktoScope **uses only bipolar stepper motors** (with 4 wires coming out, and two coils inside), so you need to identify the two wires working together for each coil. The [RepRap Wiki has great information](https://reprap.org/wiki/Stepper_wiring#.22pair.22_wires_on_4_wire_motors) on how to do this, either with a multimeter or without.
You can find more information about stepper motors and how they work in this [document](http://resources.linengineering.com/acton/attachment/3791/f-00ca/1/-/-/-/-/Stepper%20Motor%20Basics.pdf).
!!! tip
If your wires are too short, you can invert the pump and the focus wiring. However, you will have to remember to change the configuration later on. If your wires are too short, you can invert the pump and the focus wiring. However, you will have to remember to change the configuration later on.
!!! tip !!! tip