Update install.rst

This commit is contained in:
tpollina 2019-12-10 18:52:31 -08:00 committed by GitHub
parent ac097ca364
commit 2c81ba1b73
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -3,11 +3,11 @@
==========================
PlanktonScope Installation
==========================
Example of a subtitle following a header
comment the line before the cmd line
::
pi@raspberrypi:~/retext $ python3 retext.py
Install Raspbian on your Raspberry Pi
=====================================
===================
Download the image
Download the .zip file of Raspbian Buster with desktop from the Raspberry Pi website Downloads page.
@ -26,71 +26,88 @@ Finish the setup
Install the needed libraries for the PlanktonScope
Make sure you have access to internet and update/upgrade your fresh raspbian
Update your Pi first::
Update your Pi first
::
sudo apt-get update -y
sudo apt-get upgrade -y
Reboot your Pi safely::
Reboot your Pi safely
::
sudo reboot now
Install CircuitPython
==================
https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi
Text
Type this command::
sudo apt-get install python3-pip
Enable I2C and SPI
------------------
A vast number of our CircuitPython drivers use I2C and SPI for interfacing so you'll want to get those enabled.
You only have to do this once per Raspberry Pi but by default both interfaces are disabled!
Enable I2C
Enable SPI
Once you're done with both::
Once you're done with both
::
sudo reboot now
Verify you have the I2C and SPI devices with the command::
Verify you have the I2C and SPI devices with the command
::
ls /dev/i2c* /dev/spi*
Run the following command to install adafruit_blinka::
Run the following command to install adafruit_blinka
::
pip3 install adafruit-blinka
Install MotorKit
------------------
https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi?view=all
Check I2C it is working::
Check I2C it is working
::
i2cdetect -y 1
Install Circuit Python::
Install Circuit Python
------------------
cmon dude
::
sudo pip3 install adafruit-circuitpython-motorkit
Install RPi Cam Web Interface
==================
https://elinux.org/RPi-Cam-Web-Interface
Attach the PiCamera to your Raspberry Pi
Enable Camera/SSH/I2C in raspi-config::
Enable Camera/SSH/I2C in raspi-config
::
sudo raspi-config
Reboot::
Reboot
::
sudo reboot now
Update your RPi::
Update your RPi
::
sudo apt-get update -y
sudo apt-get upgrade -y
Reboot your Pi safely::
Reboot your Pi safely
::
sudo reboot now
Clone the code from github and enable and run the install script with the following commands::
Clone the code from github and enable and run the install script with the following commands
::
git clone https://github.com/silvanmelchior/RPi_Cam_Web_Interface.git
cd RPi_Cam_Web_Interface
./install.sh
Press Enter to allow default setting of the installation
Press Enter to start RPi Cam Web Interface now
Found what is the IP of your Raspberry Pi::
Found what is the IP of your Raspberry Pi
::
sudo ip addr show | grep 'inet 1'
Reach the url on a local browser : http://127.0.0.1/html/
Install Ultimate GPS HAT
==================
Set up the Pi to release the console pins
https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup
Run sudo raspi-config to open up the configuration page and select Interfacing Options :
@ -98,39 +115,47 @@ Select Serial
Select NO
Keep the Serial Port Hardware enabled
Thats it!
Shutdown your Pi safely::
Shutdown your Pi safely
::
sudo shutdown -h now
http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/
Install RGB Cooling HAT
==================
https://www.yahboom.net/study/RGB_Cooling_HAT
https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
Type this command::
Type this command
::
git clone https://github.com/WiringPi/WiringPi.git
cd WiringPi
sudo ./build
sudo apt-get install gcc
Download temp_control.zip::
Download temp_control.zip
::
Unzip it in /home/pi/
cd temp_control/
Uncomment all lines related to I2C led
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x03);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x04);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x02);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x01);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x03);
Uncomment all lines related to I2C led
::
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x03);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x04);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x02);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x01);
//wiringPiI2CWriteReg8(fd_i2c, 0x04, 0x03);
Type this command
::
gcc -o temp_control temp_control.c ssd1306_i2c.c -lwiringPi
Install Node-RED
==================
https://nodered.org/docs/getting-started/raspberrypi
Type this command::
Type this command
::
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
@ -139,30 +164,36 @@ Type this command::
Install MorphoCut
==================
https://morphocut.readthedocs.io/en/stable/installation.html
MorphoCut is packaged on PyPI and can be installed with pip::
MorphoCut is packaged on PyPI and can be installed with pip
::
pip install morphocut
Install MorphoCut server
------------------
https://github.com/morphocut/morphocut-server
Morphocut server requires Docker Compose, Nodejs and Conda
Docker Compose
------------------
Installing Docker
------------------
https://withblue.ink/2019/07/13/yes-you-can-run-docker-on-raspbian.html
Installing Docker CE on Raspbian (Stretch or Buster) for Raspberry Pi is straightforward, and its fully supported by Docker. Docker CE is not supported on Raspbian Jessie anymore, so Id recommend upgrading to a more recent release.
Were going to install Docker from the official Docker repositories. While there are Docker packages on the Raspbian repos too, those are not kept up to date, which is something of an issue with a fast-evolving software like Docker.
To install Docker CE on Raspbian Stretch and Buster:
Install some required packages first
sudo apt update -y
sudo apt install -y apt-transport-https ca-certificates curl gnupg2 software-properties-common
::
sudo apt update -y
sudo apt install -y apt-transport-https ca-certificates curl gnupg2 software-properties-common
Get the Docker signing key for packages
curl -fsSL https://download.docker.com/linux/$(. /etc/os-release; echo "$ID")/gpg | sudo apt-key add -
::
curl -fsSL https://download.docker.com/linux/$(. /etc/os-release; echo "$ID")/gpg | sudo apt-key add -
Add the Docker official repos
echo "deb [arch=armhf] https://download.docker.com/linux/$(. /etc/os-release; echo "$ID") \
$(lsb_release -cs) stable" | \
sudo tee /etc/apt/sources.list.d/docker.list
::
echo "deb [arch=armhf] https://download.docker.com/linux/$(. /etc/os-release; echo "$ID") $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list
The aufs package, part of the "recommended" packages, won't install on Buster just yet, because of missing pre-compiled kernel modules. We can work around that issue by using "--no-install-recommends"
sudo apt update
@ -182,6 +213,7 @@ If everything is working fine, the command above will output something similar t
About ARM images
------------------
This should hardly come as a surprise, but theres a caveat with running Docker on a Raspberry Pi. Since those small devices do not run on x86_64, but rather have ARM-based CPUs, you wont be able to use all the packages on the Docker Hub.
Instead, you need to look for images distributed by the arm32v7 organization (called armhf before), or tagged with those labels. Good news is that the arm32v7 organization is officially supported by Docker, so you get high-quality images.
While the CPUs inside Raspberry Pi 3s and 4s are using the ARMv8 (or ARM64) architecture, Raspbian is compiled as a 32-bit OS, so using Raspbian youre not able to run 64-bit applications or containers.
@ -191,6 +223,7 @@ In this last step were installing Docker Compose.
The official installation method for Linux, as in the Docker documentation, points users to the GitHub downloads page, which however does not offer pre-built binaries for the ARM architecture.
Luckily, we can still easily install Docker Compose from pip:
Install required packages
------------------
sudo apt update
sudo apt install -y python python-pip libffi-dev python-backports.ssl-match-hostname
@ -199,8 +232,10 @@ sudo pip install docker-compose
With this, you now have a complete Raspberry Pi mini-server running Docker and ready to accept your containers.
Nodejs
------------------
https://www.instructables.com/id/Install-Nodejs-and-Npm-on-Raspberry-Pi/
Conda
------------------
https://stackoverflow.com/questions/39371772/how-to-install-anaconda-on-raspberry-pi-3-model-b
Go and get the latest version of miniconda for Raspberry Pi - made for armv7l processor and bundled with Python 3 (eg.: uname -m)
wget http://repo.continuum.io/miniconda/Miniconda3-latest-Linux-armv7l.sh
@ -217,6 +252,7 @@ which should give you :
Python 3.4.3 :: Continuum Analytics, Inc.
Install Jupyter Notebook
==================
https://www.instructables.com/id/Jupyter-Notebook-on-Raspberry-Pi/
sudo su -
apt-get update