Add admonition configuration

docs/remote_access.md

@@ -81,7 +81,9 @@ To use the 5 GHz band, you can change the operations mode from hw_mode=g to hw_m
 - `g` = IEEE 802.11g (2.4 GHz)
 - `ad` = IEEE 802.11ad (60 GHz) (Not available on the Raspberry Pi)
 
-WARNING: Make sure you **define the wished name (ssid)** of the futur generated Wifi and its **password (wpa_passphrase)**.
+!!! warning
+        Make sure you **define the wished name (ssid)** of the future generated Wifi and its **password (wpa_passphrase)**.
+
 
 Set up your hoastapd.conf as follow ::
 ```
@@ -160,6 +162,6 @@ If SSH is enabled on the Raspberry Pi access point, it should be possible to con
 ```
         ssh pi@192.168.4.1
 ```
-Most likely your password will be **raspberry**.
+Most likely your password will be `raspberry`.
 
 By this point, the Raspberry Pi is acting as an access point, and other devices can associate with it. Associated devices can access the Raspberry Pi access point via its IP address for operations such as rsync, scp, or ssh.

mkdocs.yml

@@ -3,14 +3,14 @@ nav:
     - Setup:
         - Basic Install: easy_install.md
         - Expert Setup: expert_setup.md
-    - Remote Access: remote_access.md
+        - Remote Access: remote_access.md
     - Usage:
         - Collection devices: collection_devices.md
     - Under the hood:
         - Software architecture: software_architecture.md
         - MQTT Messages: mqtt_messages.md
     - Contribute:
-        - Edit this doc: edit_this_doc.md
+        - Edit this documentation: edit_this_doc.md
         - Edit the code: edit_the_code.md
     - About:
         - License: license.md
@@ -21,5 +21,6 @@ theme:
 markdown_extensions:
     - smarty
     - sane_lists
+    - admonition
     - toc:
         permalink: true