basic setup
This commit is contained in:
parent
9a77df136e
commit
3726a25903
10
README.md
10
README.md
|
@ -91,6 +91,16 @@ sudo reboot now
|
|||
|
||||
## Install the needed libraries for the PlanktoScop
|
||||
|
||||
Most of the following happens in a command line environment. If you are using the desktop, please start a terminal emulator.
|
||||
|
||||
You can also connect to your PlanktoScop by using ssh using `ssh pi@planktoscope.local`.
|
||||
|
||||
You can then run the following to make sure your Raspberry has the necessary components to install and build everything it needs:
|
||||
|
||||
```sh
|
||||
sudo apt-get install build-essential python3 python3-pip git
|
||||
```
|
||||
|
||||
### Install CircuitPython
|
||||
Start by following [Adafruit's guide](https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi). You can start at the chapter `Install Python Libraries`.
|
||||
|
||||
|
|
Loading…
Reference in a new issue