README: remove the repo clone step

This commit is contained in:
Romain Bazile 2020-09-28 10:27:09 +02:00
parent 9bd0e1ba02
commit 385f91400c

View file

@ -44,7 +44,7 @@ The first boot to the desktop may take up to 120 seconds. This is normal and is
Make sure you have access to internet and update/upgrade your fresh Raspbian install. Make sure you have access to internet and update/upgrade your fresh Raspbian install.
Update your Pi first. Open up a terminal, and do the following: Update your Pi first. Open up a terminal or connect via ssh to the Raspberry, and type in the following:
```sh ```sh
sudo apt update -y sudo apt update -y
sudo apt upgrade -y sudo apt upgrade -y
@ -58,18 +58,9 @@ sudo reboot now
## Raspberry Pi configuration ## Raspberry Pi configuration
### Clone this repository!
First of all, and to ensure you have the latest documentation available locally, you should clone this repository using git.
Simply run the following in a terminal:
```sh
git clone https://github.com/PlanktonPlanet/PlanktonScope/
```
### Enable Camera/SSH/I2C in raspi-config ### Enable Camera/SSH/I2C in raspi-config
You can now launch the configuration tool: You can launch the configuration tool:
```sh ```sh
sudo raspi-config sudo raspi-config
``` ```