Clean up useless files
This commit is contained in:
thibaut pollina
parent
52a538d742
commit
60bdc3ede6
|
|
@ -1,97 +0,0 @@
|
||||||
#MANUAL CONFIGURATION
|
|
||||||
#COPY PASTE LINE BY LINE
|
|
||||||
|
|
||||||
#Update and upgrade you Pi
|
|
||||||
sudo apt-get update -y && sudo apt-get full-upgrade -y
|
|
||||||
sudo reboot now
|
|
||||||
|
|
||||||
#Configure your Pi
|
|
||||||
sudo raspi-config
|
|
||||||
#Interfacing Options > Camera > Yes > OK
|
|
||||||
#Interfacing Options > SSH > Yes > OK
|
|
||||||
#Interfacing Options > I2C > Yes > OK
|
|
||||||
#Interfacing Options > SSH > No > Yes > OK
|
|
||||||
#Reboot > Yes
|
|
||||||
|
|
||||||
#Install librairies for the steppers (pump and focus)
|
|
||||||
pip3 install adafruit-blinka
|
|
||||||
sudo pip3 install adafruit-circuitpython-motorkit
|
|
||||||
|
|
||||||
#Install the librairy for the fan
|
|
||||||
git clone https://github.com/WiringPi/WiringPi.git
|
|
||||||
cd WiringPi
|
|
||||||
sudo ./build
|
|
||||||
sudo apt-get install gcc -y
|
|
||||||
|
|
||||||
#Install Node-Red
|
|
||||||
cd
|
|
||||||
sudo apt-get install build-essential -y
|
|
||||||
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
|
|
||||||
#Press y and y again to confirm the installation of Node-RED and wait.
|
|
||||||
|
|
||||||
cd .node-red/
|
|
||||||
npm install node-red-dashboard
|
|
||||||
npm install node-red-contrib-python3-function
|
|
||||||
npm install node-red-contrib-camerapi
|
|
||||||
npm install node-red-contrib-gpsd
|
|
||||||
npm install node-red-contrib-web-worldmap
|
|
||||||
sudo systemctl enable nodered.service
|
|
||||||
|
|
||||||
#BUILD CONFIGURATION
|
|
||||||
#COPY PASTE BLOCK BY BLOCK
|
|
||||||
|
|
||||||
sudo pip3 install jupyter
|
|
||||||
pip install matplotlib
|
|
||||||
pip3 install matplotlib
|
|
||||||
sudo apt-get install exfat-fuse -y
|
|
||||||
sudo apt-get install exfat-utils -y
|
|
||||||
pip install paho-mqtt
|
|
||||||
pip3 install paho-mqtt
|
|
||||||
sudo apt-get install mosquitto mosquitto-clients -y
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
pip install -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
|
||||||
pip3 install -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
|
||||||
sudo pip3 install morphocut --upgrade
|
|
||||||
pip3 install morphocut --upgrade
|
|
||||||
pip3 uninstall morphocut
|
|
||||||
pip uninstall morphocut
|
|
||||||
pip uninstall -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
|
||||||
pip freeze | xargs pip uninstall -y
|
|
||||||
pip3 freeze | xargs pip3 uninstall -y
|
|
||||||
sudo pip3 freeze | xargs pip3 uninstall -y
|
|
||||||
pip3 uninstall morphocut
|
|
||||||
sudo pip3 uninstall morphocut
|
|
||||||
sudo pip3 install morphocut
|
|
||||||
sudo pip3 uninstall morphocut
|
|
||||||
pip install -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
|
||||||
pip3 install -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
|
||||||
|
|
||||||
|
|
||||||
sudo apt-get purge wolfram-engine -y
|
|
||||||
sudo apt-get remove vlc* -y
|
|
||||||
sudo apt-get update -y && sudo apt-get upgrade -y
|
|
||||||
sudo apt-get install build-essential cmake pkg-config -y
|
|
||||||
sudo apt-get install libjpeg-dev libtiff5-dev libjasper-dev libpng12-dev -y
|
|
||||||
sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev -y
|
|
||||||
sudo apt-get install libxvidcore-dev libx264-dev -y
|
|
||||||
sudo apt-get install libgtk2.0-dev -y
|
|
||||||
sudo apt-get install libatlas-base-dev gfortran -y
|
|
||||||
sudo apt-get install python2.7-dev python3-dev -y
|
|
||||||
sudo apt-get install libjpeg-dev libtiff5-dev libjasper-dev libpng-dev -y
|
|
||||||
sudo apt-get install libfontconfig1-dev libcairo2-dev -y
|
|
||||||
sudo apt-get install libgdk-pixbuf2.0-dev libpango1.0-dev -y
|
|
||||||
sudo apt-get install libgtk2.0-dev libgtk-3-dev -y
|
|
||||||
sudo apt-get install libhdf5-dev libhdf5-serial-dev libhdf5-103 -y
|
|
||||||
sudo apt-get install libqtgui4 libqtwebkit4 libqt4-test python3-pyqt5 -y
|
|
||||||
pip install "picamera[array]"
|
|
||||||
pip3 install opencv-contrib-python==4.1.0.25
|
|
||||||
|
|
||||||
sudo apt-get install ffmpeg git python3-picamera python3-ws4py -y
|
|
||||||
git clone https://github.com/waveform80/pistreaming.git
|
|
||||||
git clone git@github.com:Lawouach/WebSocket-for-Python.git
|
|
||||||
pip install ws4py
|
|
||||||
pip3 install ws4py
|
|
||||||
pip3 install pyzmq
|
|
||||||
|
|
@ -1,72 +0,0 @@
|
||||||
#test using python3.7 morphocut.py
|
|
||||||
Processing images under /home/pi/Desktop/PlanktonScope_acquisition/01_16_2020/15...
|
|
||||||
0it [00:00, ?it/s]
|
|
||||||
0it [00:00, ?it/s]Found 94 files in /home/pi/Desktop/PlanktonScope_acquisition/01_16_2020/15.
|
|
||||||
|
|
||||||
Object 35_41_180124_84: : 85it [00:17, 5.95it/s]
|
|
||||||
Frame 35_41_180124: : 1it [00:17, 17.03s/it]
|
|
||||||
Object 35_41_763395_168: : 169it [00:24, 47.97it/s]
|
|
||||||
Frame 35_41_763395: : 2it [00:24, 14.11s/it]
|
|
||||||
Object 35_42_339153_245: : 245it [00:31, 44.73it/s]
|
|
||||||
Frame 35_42_339153: : 3it [00:31, 11.93s/it]
|
|
||||||
Object 35_42_899894_320: : 319it [00:38, 42.28it/s]
|
|
||||||
Frame 35_42_899894: : 4it [00:38, 10.44s/it]
|
|
||||||
Object 35_43_467613_394: : 394it [00:45, 44.59it/s]
|
|
||||||
Frame 35_43_467613: : 5it [00:44, 9.36s/it]
|
|
||||||
Object 35_44_040639_465: : 466it [00:56, 32.28it/s]
|
|
||||||
Frame 35_44_040639: : 6it [00:59, 9.95s/it]
|
|
||||||
Object 35_44_040639_465: : 466it [00:59, 7.78it/s]
|
|
||||||
Traceback (most recent call last):
|
|
||||||
File "/home/pi/Downloads/Morphocut.py", line 115, in <module>
|
|
||||||
p.run()
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 748, in run
|
|
||||||
for _ in self.transform_stream():
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/stream.py", line 68, in transform_stream
|
|
||||||
for obj in progress:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/tqdm/std.py", line 1104, in __iter__
|
|
||||||
for obj in iterable:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/contrib/ecotaxa.py", line 111, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/stream.py", line 184, in transform_stream
|
|
||||||
for i, obj in enumerate(stream, start=self.start):
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/image.py", line 142, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/stream.py", line 68, in transform_stream
|
|
||||||
for obj in progress:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/tqdm/std.py", line 1104, in __iter__
|
|
||||||
for obj in iterable:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 489, in transform_stream
|
|
||||||
for obj in stream:
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/core.py", line 492, in transform_stream
|
|
||||||
result = self.transform(*parameters) # pylint: disable=no-member
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/morphocut/image.py", line 78, in transform
|
|
||||||
image, in_range=in_range, out_range=self.out_range
|
|
||||||
File "/home/pi/.local/lib/python3.7/site-packages/skimage/exposure/exposure.py", line 352, in rescale_intensity
|
|
||||||
image = (image - imin) / float(imax - imin)
|
|
||||||
MemoryError
|
|
||||||
|
|
@ -1,54 +0,0 @@
|
||||||
#!/usr/bin/env python
|
|
||||||
from adafruit_motor import stepper
|
|
||||||
from adafruit_motorkit import MotorKit
|
|
||||||
from time import sleep
|
|
||||||
|
|
||||||
from thread2 import Thread
|
|
||||||
import sys
|
|
||||||
|
|
||||||
nb_step = int(sys.argv[1])
|
|
||||||
orientation = str(sys.argv[2])
|
|
||||||
toogler = str(sys.argv[3])
|
|
||||||
|
|
||||||
|
|
||||||
#Execute a python cmd with the previous defined variables from php
|
|
||||||
|
|
||||||
|
|
||||||
kit = MotorKit()
|
|
||||||
|
|
||||||
stage = kit.stepper1
|
|
||||||
|
|
||||||
stage.release()
|
|
||||||
|
|
||||||
def focus(steps,orientation):
|
|
||||||
#0.25mm/step
|
|
||||||
#31um/microsteps
|
|
||||||
|
|
||||||
stage.release()
|
|
||||||
|
|
||||||
if orientation == 'up':
|
|
||||||
for i in range(steps):
|
|
||||||
stage.onestep(direction=stepper.FORWARD, style=stepper.MICROSTEP)
|
|
||||||
sleep(0.001)
|
|
||||||
|
|
||||||
if orientation == 'down':
|
|
||||||
for i in range(steps):
|
|
||||||
stage.onestep(direction=stepper.BACKWARD, style=stepper.MICROSTEP)
|
|
||||||
sleep(0.001)
|
|
||||||
|
|
||||||
stage.release()
|
|
||||||
|
|
||||||
focus_thread = Thread(target = focus, name = 'focus_thread', args =(nb_step, orientation) )
|
|
||||||
|
|
||||||
if toogler == "ON":
|
|
||||||
|
|
||||||
focus_thread.start()
|
|
||||||
focus_thread.isAlive()
|
|
||||||
|
|
||||||
if toogler == "OFF":
|
|
||||||
|
|
||||||
focus_thread.terminate()
|
|
||||||
focus_thread.join()
|
|
||||||
focus_thread.isAlive()
|
|
||||||
stage.release()
|
|
||||||
|
|
||||||
|
|
@ -1,41 +0,0 @@
|
||||||
from adafruit_motor import stepper
|
|
||||||
from adafruit_motorkit import MotorKit
|
|
||||||
from time import sleep
|
|
||||||
|
|
||||||
import sys
|
|
||||||
|
|
||||||
vol = int(sys.argv[1])
|
|
||||||
flowrate = float(sys.argv[2])
|
|
||||||
dir = str(sys.argv[3])
|
|
||||||
|
|
||||||
kit = MotorKit()
|
|
||||||
|
|
||||||
pump_stepper = kit.stepper2
|
|
||||||
|
|
||||||
pump_stepper.release()
|
|
||||||
|
|
||||||
def pump(vol, flowrate, dir):
|
|
||||||
|
|
||||||
if dir == "foward":
|
|
||||||
dir=stepper.FORWARD
|
|
||||||
if dir == "backward":
|
|
||||||
dir=stepper.BACKWARD
|
|
||||||
|
|
||||||
nb_step=vol*507 #if sleep(0.05) in between 2 steps
|
|
||||||
#35000steps for 69g
|
|
||||||
|
|
||||||
#nb_step=vol*460 if sleep(0) in between 2 steps
|
|
||||||
duration=(vol*60)/flowrate
|
|
||||||
|
|
||||||
delay=(duration/nb_step)-0.005
|
|
||||||
|
|
||||||
for i in range(nb_step):
|
|
||||||
pump_stepper.onestep(direction=dir, style=stepper.DOUBLE)
|
|
||||||
sleep(delay)
|
|
||||||
|
|
||||||
sleep(1)
|
|
||||||
pump_stepper.release()
|
|
||||||
|
|
||||||
#volume, flowrate (from 0 to 20), direction (foward or backward)
|
|
||||||
pump(vol, flowrate, dir)
|
|
||||||
|
|
||||||
|
|
@ -1,9 +0,0 @@
|
||||||
|
|
||||||
cd ~
|
|
||||||
sudo touch starting.sh
|
|
||||||
sudo chmod 777 starting.sh
|
|
||||||
sudo echo 'sudo chmod 777 /dev/i2c-1' >> starting.sh
|
|
||||||
|
|
||||||
sudo echo './starting.sh' >> .bashrc
|
|
||||||
|
|
||||||
sudo reboot
|
|
||||||
Binary file not shown.
|
|
@ -1,11 +0,0 @@
|
||||||
#!/bin/bash
|
|
||||||
|
|
||||||
#In order to kill an on going acquisition, type this command
|
|
||||||
#bash $HOME/PlanktonScope/scripts/kill_image.sh image.py in_path sample_project sample_id acq_id
|
|
||||||
|
|
||||||
path=$1
|
|
||||||
|
|
||||||
kill -9 `ps ax | grep "image.py" | head -1 | awk '{print $1}'`
|
|
||||||
kill -9 `ps ax | grep "image.py" | head -1 | awk '{print $1}'`
|
|
||||||
|
|
||||||
rm -r $path
|
|
||||||
|
|
@ -1,8 +0,0 @@
|
||||||
#!/bin/bash
|
|
||||||
#Run this script using this type of command line : bash killer.sh name_of_the_python_script_to_kill.py
|
|
||||||
|
|
||||||
scrip_name=$1
|
|
||||||
|
|
||||||
kill -9 `ps ax | grep "$scrip_name" | head -1 | awk '{print $1}'`
|
|
||||||
|
|
||||||
python3.7 $HOME/PlanktonScope/scripts/recover.py
|
|
||||||
Loading…
Reference in a new issue