diff --git a/docs/install.rst b/docs/install.rst
index 434bf52..aeeb545 100644
--- a/docs/install.rst
+++ b/docs/install.rst
@@ -2,9 +2,9 @@
PlanktonScope Installation
==========================
-***************
+*************************************
Install Raspbian on your Raspberry Pi
-***************
+*************************************
Download the image
===================
@@ -24,8 +24,8 @@ Select the SD card you wish to write your image to.
Review your selections and click 'Flash!' to begin writing data to the SD card.
Prepare your Raspberry Pi
-------------------
-https://projects.raspberrypi.org/en/projects/raspberry-pi-getting-started/
+-------------------------
+`Getting Started with your Raspberry Pi `_
Plug the SD Card in your Raspberry Pi
@@ -35,7 +35,7 @@ Finish the setup
Make sure you have access to internet and update/upgrade your fresh raspbian
-Update your Pi first
+Update your Pi first
::
sudo apt-get update -y
sudo apt-get upgrade -y
@@ -44,9 +44,9 @@ Reboot your Pi safely
::
sudo reboot now
-***************
+***************************
Raspberry Pi configurations
-***************
+******************
Enable Camera/SSH/I2C in raspi-config
@@ -67,11 +67,11 @@ Reboot your Pi safely
***************
Install the needed libraries for the PlanktonScope
-***************
+***********************
Install CircuitPython
-==================
-https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi
+=====================
+`Installing CircuitPython on Raspberry Pi `_
Run the following command to install adafruit_blinka
::
@@ -79,8 +79,9 @@ Run the following command to install adafruit_blinka
sudo pip3 install adafruit-circuitpython-motorkit
Install RPi Cam Web Interface
-==================
-https://elinux.org/RPi-Cam-Web-Interface
+=============================
+
+`RPi Cam Web Interface `_
Clone the code from github and enable and run the install script with the following commands
::
@@ -98,13 +99,15 @@ Reach the url on a local browser : http://127.0.0.1/html/
Install Ultimate GPS HAT
==================
-https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup
-http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/
+`Installing Adafruit GPS HAT `_
+
+`Use Python Thread with GPS HAT `_
+
Install RGB Cooling HAT
==================
-https://www.yahboom.net/study/RGB_Cooling_HAT
-https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
+`Installing RGB Cooling HAT `_
+
::
git clone https://github.com/WiringPi/WiringPi.git
cd WiringPi
@@ -113,14 +116,16 @@ https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
Install Node-RED
==================
-https://nodered.org/docs/getting-started/raspberrypi
+`Installing Node-RED on Raspberry Pi `_
+
Prerequisites
-------------------
+-------------
Ensure npm is able to build any binary modules it needs to install.
::
sudo apt-get install build-essential
+
Download and installation
-------------------
+-------------------------
To install Node.js, npm and Node-RED onto a Raspberry Pi, run the following command will that download and install them:
::
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
@@ -128,19 +133,21 @@ To install Node.js, npm and Node-RED onto a Raspberry Pi, run the following comm
Due to the limited memory of the Raspberry Pi, you will need to start Node-RED with an additional argument to tell the underlying Node.js process to free up unused memory sooner than it would otherwise.
::
node-red-pi --max-old-space-size=256
+
Autostart on boot
-------------------
+-----------------
Run Node-RED when the Pi is turned on, or re-booted, enable the service to autostart by running the command:
::
sudo systemctl enable nodered.service
+
Check the installation
-------------------
+----------------------
Make sure NodeRed is correctly installed by reaching the following page from the broswer of your pi :
::
-http://localhost:1880.
+ http://localhost:1880.
Install few nodes
-------------------
+-----------------
These nodes will be used in Node-RED:
::
cd .node-red/
@@ -154,7 +161,7 @@ These nodes will be used in Node-RED:
npm install node-red-contrib-calc
Import the last GUI
-------------------
+-------------------
https://raw.githubusercontent.com/tpollina/PlanktonScope/master/scripts/flows_planktonscope.json
Import the last version of the .json file storing the lastest improvement of the GUI