Docs: add proper info about the LED wiring
This commit is contained in:
parent
2ff1df427b
commit
71bc0e6a1e
|
@ -94,6 +94,12 @@ You can mount the camera using the appropriate holes on the camera mount **G**.
|
|||
|
||||
The LED can then be wired up and put into its mount **F**. If you wire the LED yourself, remember to give enough length to reach the motor driver on the other end of the microscope. You can also add a bit of glue to fix **F** to the motor mount **E** at this time to make assembly easier, though it is not required.
|
||||
|
||||
!!! warning
|
||||
![Led](assembly_guide/render/led.webp)
|
||||
|
||||
This picture shows the correct wiring for the LED. Please make sure the red wire is on the long pin of the LED.
|
||||
|
||||
|
||||
## Step 10: Vertical slices assembly
|
||||
You can now start placing the motor mount/LED assembly- **B**,
|
||||
![Step5](assembly_guide/render/step5.webp)
|
||||
|
|
BIN
docs/assembly_guide/render/led.webp
Normal file
BIN
docs/assembly_guide/render/led.webp
Normal file
Binary file not shown.
After Width: | Height: | Size: 8.3 KiB |
Loading…
Reference in a new issue