Create remote_access.rst

docs/remote_access.rst

@@ -0,0 +1,45 @@
+=============
+Remote access
+=============
+
+This tutorial is allowing your Raspberry Pi 
+
+.. warning::
+
+    Make sure your Raspberry Pi is connected to Internet either via WiFi or Ethernet.
+    
+    
+Use the command lines to first update and upgrade your Raspbian ::
+
+    $ sudo apt-get update -y
+    $ sudo apt-get dist-upgrade -y
+    
+It's a good practice to reboot after that using ::
+
+    $ sudo reboot now
+
+Install all the required packages this command ::
+
+    $ sudo apt-get install dnsmasq hostapd -y
+    
+   
+.. _test_suite:
+
+Test suite
+==========
+
+If you wish to run the picamera test suite, follow the instructions in
+:ref:`dev_install` above and then make the "test" target within the sandbox::
+
+    $ source sandbox/bin/activate
+    (sandbox) $ cd picamera
+    (sandbox) $ make test
+
+.. warning::
+
+    The test suite takes a *very* long time to execute (at least 1 hour on an
+    overclocked Pi 3). Depending on configuration, it can also lockup the
+    camera requiring a reboot to reset, so ensure you are familiar with SSH or
+    using alternate TTYs to access a command line in the event you need to
+    reboot.
+