Update install.rst

This commit is contained in:
tpollina 2019-12-10 19:03:07 -08:00 committed by GitHub
parent 502644590e
commit 88f58ad4c5
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -59,58 +59,14 @@ Install CircuitPython
================== ==================
https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi
Enable I2C and SPI
------------------
A vast number of our CircuitPython drivers use I2C and SPI for interfacing so you'll want to get those enabled.
You only have to do this once per Raspberry Pi but by default both interfaces are disabled!
Enable I2C
Enable SPI
Once you're done with both
::
sudo reboot now
Verify you have the I2C and SPI devices with the command
::
ls /dev/i2c* /dev/spi*
Run the following command to install adafruit_blinka Run the following command to install adafruit_blinka
:: ::
pip3 install adafruit-blinka pip3 install adafruit-blinka
Install MotorKit
------------------
https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi?view=all
Check I2C it is working
::
i2cdetect -y 1
Install Circuit Python
------------------
cmon dude
::
sudo pip3 install adafruit-circuitpython-motorkit sudo pip3 install adafruit-circuitpython-motorkit
Install RPi Cam Web Interface Install RPi Cam Web Interface
================== ==================
https://elinux.org/RPi-Cam-Web-Interface https://elinux.org/RPi-Cam-Web-Interface
Attach the PiCamera to your Raspberry Pi
Enable Camera/SSH/I2C in raspi-config
::
sudo raspi-config
Reboot
::
sudo reboot now
Update your RPi
::
sudo apt-get update -y
sudo apt-get upgrade -y
Reboot your Pi safely
::
sudo reboot now
Clone the code from github and enable and run the install script with the following commands Clone the code from github and enable and run the install script with the following commands
:: ::
@ -128,24 +84,13 @@ Reach the url on a local browser : http://127.0.0.1/html/
Install Ultimate GPS HAT Install Ultimate GPS HAT
================== ==================
Set up the Pi to release the console pins
https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup
Run sudo raspi-config to open up the configuration page and select Interfacing Options :
Select Serial
Select NO
Keep the Serial Port Hardware enabled
Thats it!
Shutdown your Pi safely
::
sudo shutdown -h now
http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/ http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/
Install RGB Cooling HAT Install RGB Cooling HAT
================== ==================
https://www.yahboom.net/study/RGB_Cooling_HAT https://www.yahboom.net/study/RGB_Cooling_HAT
https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
Type this command
:: ::
git clone https://github.com/WiringPi/WiringPi.git git clone https://github.com/WiringPi/WiringPi.git
cd WiringPi cd WiringPi
@ -177,11 +122,6 @@ https://nodered.org/docs/getting-started/raspberrypi
Type this command Type this command
:: ::
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered) bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
Install MorphoCut Install MorphoCut
================== ==================