Update remote_access.rst
This commit is contained in:
parent
3ca8853ab9
commit
c9a3c69817
|
@ -2,44 +2,6 @@
|
|||
Remote access
|
||||
=============
|
||||
|
||||
.. warning::
|
||||
|
||||
Make sure your Raspberry Pi is connected to Internet either via WiFi or Ethernet.
|
||||
|
||||
Update your Pi
|
||||
==============
|
||||
|
||||
Use the command lines to first update and upgrade your Raspbian ::
|
||||
|
||||
$ sudo apt-get update -y
|
||||
$ sudo apt-get dist-upgrade -y
|
||||
|
||||
It's a good practice to reboot after that using ::
|
||||
|
||||
$ sudo reboot now
|
||||
|
||||
Packages installation
|
||||
=====================
|
||||
|
||||
Install the packages for the standalone WiFi ::
|
||||
|
||||
$ sudo apt-get install dnsmasq hostapd -y
|
||||
|
||||
Install the packages for the standalone WiFi ::
|
||||
|
||||
$ sudo apt-get install dnsmasq hostapd -y
|
||||
$ sudo apt-get install git -y
|
||||
$ git clone https://github.com/silvanmelchior/RPi_Cam_Web_Interface.git
|
||||
$ cd RPi_Cam_Web_Interface
|
||||
$ ./install.sh
|
||||
|
||||
#
|
||||
#
|
||||
#
|
||||
#
|
||||
#
|
||||
|
||||
|
||||
Setting up a Raspberry Pi as an access point in a standalone network (NAT)
|
||||
==========================================================================
|
||||
|
||||
|
@ -124,7 +86,7 @@ To use the 5 GHz band, you can change the operations mode from hw_mode=g to hw_m
|
|||
|
||||
.. warning::
|
||||
|
||||
Make sure you define the wished name (ssid) of the futur generated Wifi and its password (wpa_passphrase).
|
||||
Make sure you **define the wished name (ssid)** of the futur generated Wifi and its **password (wpa_passphrase)**.
|
||||
|
||||
Set up your hoastapd.conf as follow ::
|
||||
|
||||
|
|
Loading…
Reference in a new issue