managed to send data over MQTT

software/firmware/energy-montior/02-energy-monitor-mqtt/02-energy-monitor-mqtt.ino

@@ -1,26 +1,109 @@
 /*
-SCT-013 Sensor - Power meassurement, based on Thomas Edlinger's code for "www.edistechlab.com"
 Required libraries (Tools -> manage libraries)
- - EmonLib libary V1.1.0 by OpenEnergyMonitor
+ - EmonLib@1.1.0
-Based on EmonLibrary examples openenergymonitor.org, Licence GNU GPL V3
+ - PubSubClient@2.8.0
+ - Wifi
 */
-
 #include "EmonLib.h"
+#include <WiFi.h>
+#include <PubSubClient.h>
+#include "environment.h" // put your credentials and configuration in, here
+
+// sensor
 EnergyMonitor emon1;
 const byte current1Pin = A1; // ADC-PIN
 const byte voltage = 230;  // Power voltage in Europe = 230 V
 
+// refrences from environment.h
+const char* ssid = secrect_ssid;
+const char* password = secret_password;
+const char* mqttServer = mqtt_server;
+const int mqttPort = mqtt_port;
+
+// wifi and MQTT
+WiFiClient wifiClient;
+PubSubClient client(wifiClient);
+
+
 void setup() {
   Serial.begin(115200);
+  Serial.setTimeout(500);
+  setup_energy_sensor();
+  setup_wifi();
+  client.setServer(mqttServer, mqttPort);
+  reconnect();
+}
+
+void setup_energy_sensor() {
   analogReadResolution(ADC_BITS); // activate 12 Bit resolution for our ESP32
   emon1.current(current1Pin, 8);  // Pin and Calibration
 }
 
+void setup_wifi() {
+    delay(10);
+    Serial.println();
+    Serial.print("Connecting to ");
+    Serial.println(ssid);
+    WiFi.begin(ssid, password);
+    while (WiFi.status() != WL_CONNECTED) {
+      delay(500);
+      Serial.print(".");
+    }
+    randomSeed(micros());
+    Serial.println("");
+    Serial.println("WiFi connected");
+    Serial.println("IP address: ");
+    Serial.println(WiFi.localIP());
+}
+
+void reconnect() {
+  // Loop until we're reconnected
+  while (!client.connected()) {
+    Serial.print("Attempting MQTT connection...");
+    // Create a random client ID
+    String clientId = "ESP32Client-";
+    clientId += String(random(0xffff), HEX);
+    // Attempt to connect
+    if (client.connect(clientId.c_str())) {
+      Serial.println("connected");
+      //Once connected, publish an announcement...
+      client.publish("/iot-platform/engergy-montitor/test-device/status", "online");
+      // ... and resubscribe
+    } else {
+      Serial.print("failed, rc=");
+      Serial.print(client.state());
+      Serial.println(" try again in 5 seconds");
+      // Wait 5 seconds before retrying
+      delay(5000);
+    }
+  }
+}
+
 void loop() {
-  double Irms = emon1.calcIrms(1480);
+  double irms = emon1.calcIrms(1480);
-  Serial.print(Irms*voltage);
+  double power = irms * voltage;
+
+
+
+  // debug, print out on serial
+  Serial.print(power);
   Serial.print(" Watt  -  ");
-  Serial.print(Irms);
+  Serial.print(irms);
   Serial.println(" Ampere");
+
+
+  // convert double to char array for MQTT
+
+  char powerArray[10];
+  snprintf(powerArray, 10, "%f", power);
+
+  char irmsArray[10];
+  snprintf(irmsArray, 10, "%f", irms);
+  printf("%s", irmsArray);
+
+  // publish values
+  client.publish("/iot-platform/engergy-montitor/test-device/watt", powerArray);
+  client.publish("/iot-platform/engergy-montitor/test-device/ampere", irmsArray);
+  // wait a second
   delay(1000);
 }

software/firmware/energy-montior/02-energy-monitor-mqtt/environment.h

@@ -1,5 +1,5 @@
 // Replace with your network credentials
-#define secrect_ssid "your_ssid"
+#define secrect_ssid "Guest"
-#define secret_password "your_password"
+#define secret_password "guestguest"
-#define mqttServer = "m16.cloudmqtt.com"
+#define mqtt_server "192.168.2.103"
-#define mqttPort = 12595
+#define mqtt_port 1883