diff --git a/mod/mould/casting_from_3D_positive_mould/res/conf/README.md b/mod/mould/casting_from_3D_positive_mould/res/conf/README.md
index 1a06e71..ceef14d 100644
--- a/mod/mould/casting_from_3D_positive_mould/res/conf/README.md
+++ b/mod/mould/casting_from_3D_positive_mould/res/conf/README.md
@@ -10,13 +10,13 @@ SPDX-License-Identifier: CC-BY-SA-4.0
 
 ### Cura - Ultimaker
 | Hardware: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Drucker | Ultimaker 2 Extended + |
 | Material | PLA |
 
 
 | Einstellungen: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Nozzlegröße | 0,4 mm |
 | Schichthöhe | 0,2 mm |
 | Wandstärke | 0,8 mm|
@@ -31,12 +31,12 @@ SPDX-License-Identifier: CC-BY-SA-4.0
 ### Blade - BigRep
 
 | Hardware: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Drucker | BigRep ONE 1.3 |
 | Material | PLA |
 
 | Einstellungen: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Nozzlegröße | 1 mm |
 | Schichthöhe | 0,6 mm |
 | Wandstärke | 2 mm |
diff --git a/mod/mould/direct_3D_negative_mould/res/conf/README.md b/mod/mould/direct_3D_negative_mould/res/conf/README.md
index aa0b422..d31be14 100644
--- a/mod/mould/direct_3D_negative_mould/res/conf/README.md
+++ b/mod/mould/direct_3D_negative_mould/res/conf/README.md
@@ -10,13 +10,13 @@ SPDX-License-Identifier: CC-BY-SA-4.0
 
 ### Cura - Ultimaker
 | Hardware: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Drucker | Ultimaker 2 Extended + |
 | Material | PLA |
 
 
 | Einstellungen: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Nozzlegröße | 0,4 mm |
 | Schichthöhe | 0,2 mm |
 | Wandstärke | 0,8 mm|
@@ -31,12 +31,12 @@ SPDX-License-Identifier: CC-BY-SA-4.0
 ### Blade - BigRep
 
 | Hardware: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Drucker | BigRep ONE 1.3 |
 | Material | PLA |
 
 | Einstellungen: |  |
-| ---: | :--- |
+| :--- | :--- |
 | Nozzlegröße | 1 mm |
 | Schichthöhe | 0,6 mm |
 | Wandstärke | 2 mm |