From e0de148aabface4a9819d04f56c369073efbc526 Mon Sep 17 00:00:00 2001 From: lukas Date: Fri, 10 Feb 2023 19:03:38 +0100 Subject: [PATCH] Formatierung der Tabelle anpassen --- .../casting_from_3D_positive_mould/res/conf/README.md | 8 ++++---- mod/mould/direct_3D_negative_mould/res/conf/README.md | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/mod/mould/casting_from_3D_positive_mould/res/conf/README.md b/mod/mould/casting_from_3D_positive_mould/res/conf/README.md index 1a06e71..ceef14d 100644 --- a/mod/mould/casting_from_3D_positive_mould/res/conf/README.md +++ b/mod/mould/casting_from_3D_positive_mould/res/conf/README.md @@ -10,13 +10,13 @@ SPDX-License-Identifier: CC-BY-SA-4.0 ### Cura - Ultimaker | Hardware: | | -| ---: | :--- | +| :--- | :--- | | Drucker | Ultimaker 2 Extended + | | Material | PLA | | Einstellungen: | | -| ---: | :--- | +| :--- | :--- | | Nozzlegröße | 0,4 mm | | Schichthöhe | 0,2 mm | | Wandstärke | 0,8 mm| @@ -31,12 +31,12 @@ SPDX-License-Identifier: CC-BY-SA-4.0 ### Blade - BigRep | Hardware: | | -| ---: | :--- | +| :--- | :--- | | Drucker | BigRep ONE 1.3 | | Material | PLA | | Einstellungen: | | -| ---: | :--- | +| :--- | :--- | | Nozzlegröße | 1 mm | | Schichthöhe | 0,6 mm | | Wandstärke | 2 mm | diff --git a/mod/mould/direct_3D_negative_mould/res/conf/README.md b/mod/mould/direct_3D_negative_mould/res/conf/README.md index aa0b422..d31be14 100644 --- a/mod/mould/direct_3D_negative_mould/res/conf/README.md +++ b/mod/mould/direct_3D_negative_mould/res/conf/README.md @@ -10,13 +10,13 @@ SPDX-License-Identifier: CC-BY-SA-4.0 ### Cura - Ultimaker | Hardware: | | -| ---: | :--- | +| :--- | :--- | | Drucker | Ultimaker 2 Extended + | | Material | PLA | | Einstellungen: | | -| ---: | :--- | +| :--- | :--- | | Nozzlegröße | 0,4 mm | | Schichthöhe | 0,2 mm | | Wandstärke | 0,8 mm| @@ -31,12 +31,12 @@ SPDX-License-Identifier: CC-BY-SA-4.0 ### Blade - BigRep | Hardware: | | -| ---: | :--- | +| :--- | :--- | | Drucker | BigRep ONE 1.3 | | Material | PLA | | Einstellungen: | | -| ---: | :--- | +| :--- | :--- | | Nozzlegröße | 1 mm | | Schichthöhe | 0,6 mm | | Wandstärke | 2 mm |