RGB HAT Setup

This commit is contained in:
Romain Bazile 2020-07-19 19:28:55 +02:00
parent bd2694b6b3
commit 18b19238c4

View file

@ -209,15 +209,19 @@ $GPRMC,000910.799,V,,,,,0.00,0.00,060180,,,N*4D
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
```
### Install RGB Cooling HAT
[Installing RGB Cooling HAT](https://www.yahboom.net/study/RGB_Cooling_HAT)
Until you get a GPS fix, most of the sentences are empty (see the lines starting with GPGSA and with lot of commas).
Type these command to install:
```
You can find more information in this hardware module in Adafruit documentation at [Installing Adafruit GPS HAT](https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/overview) or on this page to [use Python Thread with GPS HAT](http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/)
### Install RGB Cooling HAT
To setup the RGB Cooling HAT, you just need to clone and build the WiringPi library:
```sh
git clone https://github.com/WiringPi/WiringPi.git
cd WiringPi
sudo ./build
sudo apt-get install gcc
gpio -v
```
### Install Node-RED