script to test adafruit blinka

This commit is contained in:
Romain Bazile 2020-07-19 19:23:37 +02:00
parent 3726a25903
commit 46e721a80f

View file

@ -111,6 +111,47 @@ pip3 install adafruit-blinka
sudo pip3 install adafruit-circuitpython-motorkit sudo pip3 install adafruit-circuitpython-motorkit
``` ```
It is recommended to test this setup by creating this small script under the name `blinkatest.py` and running it:
```python
#!/usr/bin/python3
import board
import digitalio
import busio
print("Hello blinka!")
# Try to great a Digital input
pin = digitalio.DigitalInOut(board.D4)
print("Digital IO ok!")
# Try to create an I2C device
i2c = busio.I2C(board.SCL, board.SDA)
print("I2C ok!")
# Try to create an SPI device
spi = busio.SPI(board.SCLK, board.MOSI, board.MISO)
print("SPI ok!")
print("done!")
```
To run the script, just run the following:
```sh
chmod +x blinkatest.py
./blinkatest.py
```
The output should be similar to this:
```
pi@planktoscope:~ $ ./test/blinkatest.py
Hello blinka!
Digital IO ok!
I2C ok!
SPI ok!
done!
```
### Install RPi Cam Web Interface ### Install RPi Cam Web Interface
You can find more information about the RPi Cam Web Interface on [eLinux' website](https://elinux.org/RPi-Cam-Web-Interface). You can find more information about the RPi Cam Web Interface on [eLinux' website](https://elinux.org/RPi-Cam-Web-Interface).