Update install.rst

This commit is contained in:
tpollina 2019-12-16 19:22:33 -08:00 committed by GitHub
parent 8fcb253f61
commit 716c1e7626
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -2,9 +2,9 @@
PlanktonScope Installation
==========================
***************
*************************************
Install Raspbian on your Raspberry Pi
***************
*************************************
Download the image
===================
@ -24,8 +24,8 @@ Select the SD card you wish to write your image to.
Review your selections and click 'Flash!' to begin writing data to the SD card.
Prepare your Raspberry Pi
------------------
https://projects.raspberrypi.org/en/projects/raspberry-pi-getting-started/
-------------------------
`Getting Started with your Raspberry Pi <https://projects.raspberrypi.org/en/projects/raspberry-pi-getting-started/>`_
Plug the SD Card in your Raspberry Pi
@ -44,9 +44,9 @@ Reboot your Pi safely
::
sudo reboot now
***************
***************************
Raspberry Pi configurations
***************
******************
Enable Camera/SSH/I2C in raspi-config
@ -67,11 +67,11 @@ Reboot your Pi safely
***************
Install the needed libraries for the PlanktonScope
***************
***********************
Install CircuitPython
==================
https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi
=====================
`Installing CircuitPython on Raspberry Pi <https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi>`_
Run the following command to install adafruit_blinka
::
@ -79,8 +79,9 @@ Run the following command to install adafruit_blinka
sudo pip3 install adafruit-circuitpython-motorkit
Install RPi Cam Web Interface
==================
https://elinux.org/RPi-Cam-Web-Interface
=============================
`RPi Cam Web Interface <https://elinux.org/RPi-Cam-Web-Interface>`_
Clone the code from github and enable and run the install script with the following commands
::
@ -98,13 +99,15 @@ Reach the url on a local browser : http://127.0.0.1/html/
Install Ultimate GPS HAT
==================
https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup
http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/
`Installing Adafruit GPS HAT <https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup >`_
`Use Python Thread with GPS HAT <http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/ >`_
Install RGB Cooling HAT
==================
https://www.yahboom.net/study/RGB_Cooling_HAT
https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
`Installing RGB Cooling HAT <https://www.yahboom.net/study/RGB_Cooling_HAT >`_
::
git clone https://github.com/WiringPi/WiringPi.git
cd WiringPi
@ -113,14 +116,16 @@ https://github.com/YahboomTechnology/Raspberry-Pi-RGB-Cooling-HAT
Install Node-RED
==================
https://nodered.org/docs/getting-started/raspberrypi
`Installing Node-RED on Raspberry Pi <https://nodered.org/docs/getting-started/raspberrypi>`_
Prerequisites
------------------
-------------
Ensure npm is able to build any binary modules it needs to install.
::
sudo apt-get install build-essential
Download and installation
------------------
-------------------------
To install Node.js, npm and Node-RED onto a Raspberry Pi, run the following command will that download and install them:
::
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
@ -128,19 +133,21 @@ To install Node.js, npm and Node-RED onto a Raspberry Pi, run the following comm
Due to the limited memory of the Raspberry Pi, you will need to start Node-RED with an additional argument to tell the underlying Node.js process to free up unused memory sooner than it would otherwise.
::
node-red-pi --max-old-space-size=256
Autostart on boot
------------------
-----------------
Run Node-RED when the Pi is turned on, or re-booted, enable the service to autostart by running the command:
::
sudo systemctl enable nodered.service
Check the installation
------------------
----------------------
Make sure NodeRed is correctly installed by reaching the following page from the broswer of your pi :
::
http://localhost:1880.
http://localhost:1880.
Install few nodes
------------------
-----------------
These nodes will be used in Node-RED:
::
cd .node-red/
@ -154,7 +161,7 @@ These nodes will be used in Node-RED:
npm install node-red-contrib-calc
Import the last GUI
------------------
-------------------
https://raw.githubusercontent.com/tpollina/PlanktonScope/master/scripts/flows_planktonscope.json
Import the last version of the .json file storing the lastest improvement of the GUI