Update README.md
This commit is contained in:
tpollina
GitHub
parent
7ac8bebde9
commit
cf1be6ec1e
237
README.md
237
README.md
|
|
@ -1,4 +1,235 @@
|
||||||
# PlanktonScope
|
==========================
|
||||||
|
PlanktonScope Installation
|
||||||
|
==========================
|
||||||
|
|
||||||
|
*************************************
|
||||||
|
Install Raspbian on your Raspberry Pi
|
||||||
|
*************************************
|
||||||
|
|
||||||
|
Download the image
|
||||||
|
==================
|
||||||
|
|
||||||
|
Download the .zip file of Raspbian Buster with desktop from the Raspberry Pi website Downloads page.
|
||||||
|
|
||||||
|
Writing an image to the SD card
|
||||||
|
|
||||||
|
Download the latest version of balenaEtcher and install it.
|
||||||
|
|
||||||
|
Connect an SD card reader with the micro SD card inside.
|
||||||
|
|
||||||
|
Open balenaEtcher and select from your hard drive the Raspberry Pi .zip file you wish to write to the SD card.
|
||||||
|
|
||||||
|
Select the SD card you wish to write your image to.
|
||||||
|
|
||||||
|
Review your selections and click 'Flash!' to begin writing data to the SD card.
|
||||||
|
|
||||||
|
Prepare your Raspberry Pi
|
||||||
|
-------------------------
|
||||||
|
`Getting Started with your Raspberry Pi <https://projects.raspberrypi.org/en/projects/raspberry-pi-getting-started/>`_
|
||||||
|
|
||||||
|
Plug the SD Card in your Raspberry Pi
|
||||||
|
|
||||||
|
Connect your Pi to a screen, mouse, keyboard and power
|
||||||
|
|
||||||
|
Finish the setup
|
||||||
|
|
||||||
|
Make sure you have access to internet and update/upgrade your fresh raspbian
|
||||||
|
|
||||||
|
Update your Pi first
|
||||||
|
::
|
||||||
|
sudo apt-get update -y
|
||||||
|
sudo apt-get upgrade -y
|
||||||
|
|
||||||
|
Reboot your Pi safely
|
||||||
|
::
|
||||||
|
sudo reboot now
|
||||||
|
|
||||||
|
***************************
|
||||||
|
Raspberry Pi configurations
|
||||||
|
***************************
|
||||||
|
|
||||||
|
Enable Camera/SSH/I2C in raspi-config
|
||||||
|
|
||||||
|
Open up the configuration page and select Interfacing Options by typing this command:
|
||||||
|
::
|
||||||
|
sudo raspi-config
|
||||||
|
|
||||||
|
Select **Serial**
|
||||||
|
|
||||||
|
Select **NO**
|
||||||
|
|
||||||
|
Keep the **Serial Port Hardware enabled**
|
||||||
|
|
||||||
|
Reboot your Pi safely
|
||||||
|
::
|
||||||
|
sudo reboot now
|
||||||
|
|
||||||
|
|
||||||
|
**************************************************
|
||||||
|
Install the needed libraries for the PlanktonScope
|
||||||
|
**************************************************
|
||||||
|
|
||||||
|
Install CircuitPython
|
||||||
|
=====================
|
||||||
|
`Installing CircuitPython on Raspberry Pi <https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi>`_
|
||||||
|
|
||||||
|
Run the following command to install adafruit_blinka
|
||||||
|
::
|
||||||
|
pip3 install adafruit-blinka
|
||||||
|
sudo pip3 install adafruit-circuitpython-motorkit
|
||||||
|
|
||||||
|
Install RPi Cam Web Interface
|
||||||
|
=============================
|
||||||
|
|
||||||
|
`RPi Cam Web Interface <https://elinux.org/RPi-Cam-Web-Interface>`_
|
||||||
|
|
||||||
|
Clone the code from github and enable and run the install script with the following commands
|
||||||
|
::
|
||||||
|
git clone https://github.com/silvanmelchior/RPi_Cam_Web_Interface.git
|
||||||
|
cd RPi_Cam_Web_Interface
|
||||||
|
./install.sh
|
||||||
|
|
||||||
|
Press Enter to allow default setting of the installation
|
||||||
|
Press Enter to start RPi Cam Web Interface now
|
||||||
|
Found what is the IP of your Raspberry Pi
|
||||||
|
::
|
||||||
|
sudo ip addr show | grep 'inet 1'
|
||||||
|
|
||||||
|
Reach the url on a local browser : http://127.0.0.1/html/
|
||||||
|
|
||||||
|
Install Ultimate GPS HAT
|
||||||
|
========================
|
||||||
|
`Installing Adafruit GPS HAT <https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi/pi-setup>`_
|
||||||
|
|
||||||
|
`Use Python Thread with GPS HAT <http://www.danmandle.com/blog/getting-gpsd-to-work-with-python/>`_
|
||||||
|
|
||||||
|
::
|
||||||
|
sudo apt-get install python gpsd gpsd-clients
|
||||||
|
|
||||||
|
Install RGB Cooling HAT
|
||||||
|
=======================
|
||||||
|
`Installing RGB Cooling HAT <https://www.yahboom.net/study/RGB_Cooling_HAT>`_
|
||||||
|
Type these command to install:
|
||||||
|
::
|
||||||
|
git clone https://github.com/WiringPi/WiringPi.git
|
||||||
|
cd WiringPi
|
||||||
|
sudo ./build
|
||||||
|
sudo apt-get install gcc
|
||||||
|
|
||||||
|
Install Node-RED
|
||||||
|
==================
|
||||||
|
`Installing Node-RED on Raspberry Pi <https://nodered.org/docs/getting-started/raspberrypi>`_
|
||||||
|
|
||||||
|
Prerequisites
|
||||||
|
-------------
|
||||||
|
Ensure npm is able to build any binary modules it needs to install.
|
||||||
|
::
|
||||||
|
sudo apt-get install build-essential
|
||||||
|
|
||||||
|
Download and installation
|
||||||
|
-------------------------
|
||||||
|
To install Node.js, npm and Node-RED onto a Raspberry Pi, run the following command will that download and install them:
|
||||||
|
::
|
||||||
|
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
|
||||||
|
|
||||||
|
Due to the limited memory of the Raspberry Pi, you will need to start Node-RED with an additional argument to tell the underlying Node.js process to free up unused memory sooner than it would otherwise.
|
||||||
|
::
|
||||||
|
node-red-pi --max-old-space-size=256
|
||||||
|
|
||||||
|
Autostart on boot
|
||||||
|
-----------------
|
||||||
|
Run Node-RED when the Pi is turned on, or re-booted, enable the service to autostart by running the command:
|
||||||
|
::
|
||||||
|
sudo systemctl enable nodered.service
|
||||||
|
|
||||||
|
Check the installation
|
||||||
|
----------------------
|
||||||
|
Make sure NodeRed is correctly installed by reaching the following page from the broswer of your pi :
|
||||||
|
::
|
||||||
|
http://localhost:1880.
|
||||||
|
|
||||||
|
Install few nodes
|
||||||
|
-----------------
|
||||||
|
These nodes will be used in Node-RED:
|
||||||
|
::
|
||||||
|
cd .node-red/
|
||||||
|
npm install node-red-dashboard
|
||||||
|
npm install node-red-contrib-python3-function
|
||||||
|
npm install node-red-contrib-camerapi
|
||||||
|
npm install node-red-contrib-gpsd
|
||||||
|
npm install node-red-contrib-web-worldmap
|
||||||
|
|
||||||
|
Import the last GUI
|
||||||
|
-------------------
|
||||||
|
|
||||||
|
Import the `lastest version of the GUI <https://raw.githubusercontent.com/tpollina/PlanktonScope/master/scripts/flows_planktonscope.json>`_
|
||||||
|
|
||||||
|
Install Mosquitto MQTT
|
||||||
|
======================
|
||||||
|
|
||||||
|
In order to send and receive from Node-RED:
|
||||||
|
::
|
||||||
|
sudo apt-get install mosquitto mosquitto-clients
|
||||||
|
|
||||||
|
|
||||||
|
Install mqtt-paho
|
||||||
|
=================
|
||||||
|
|
||||||
|
In order to send and receive from python:
|
||||||
|
::
|
||||||
|
pip3 install paho-mqtt
|
||||||
|
|
||||||
|
Install OpenCV
|
||||||
|
=================
|
||||||
|
|
||||||
|
Use the quick version without virtual env
|
||||||
|
https://www.pyimagesearch.com/2019/09/16/install-opencv-4-on-raspberry-pi-4-and-raspbian-buster/
|
||||||
|
|
||||||
|
|
||||||
|
Install MorphoCut
|
||||||
|
=================
|
||||||
|
|
||||||
|
`Installing MorphoCut <https://morphocut.readthedocs.io/en/stable/installation.html>`_
|
||||||
|
|
||||||
|
MorphoCut is packaged on PyPI and can be installed with pip:
|
||||||
|
::
|
||||||
|
sudo apt-get install python3-scipy
|
||||||
|
pip3 install -U git+https://github.com/morphocut/morphocut.git@pyrocystis
|
||||||
|
|
||||||
|
Finishing the install
|
||||||
|
=====================
|
||||||
|
|
||||||
|
Make sure to update your Pi
|
||||||
|
::
|
||||||
|
sudo apt-get update -y
|
||||||
|
sudo apt-get full-upgrade -y
|
||||||
|
|
||||||
|
Reboot your Pi safely
|
||||||
|
::
|
||||||
|
sudo reboot now
|
||||||
|
|
||||||
|
|
||||||
|
*******************
|
||||||
|
Usefull later maybe
|
||||||
|
*******************
|
||||||
|
|
||||||
|
Download the GitHub repo
|
||||||
|
========================
|
||||||
|
At this link : https://github.com/tpollina/PlanktonScope/archive/master.zip
|
||||||
|
Unzip to a specific location:
|
||||||
|
::
|
||||||
|
unzip /home/pi/Downloads/PlanktonScope-master.zip -d /home/pi/
|
||||||
|
mv /home/pi/PlanktonScope-master /home/pi/PlanktonScope
|
||||||
|
|
||||||
|
Update node-RED interface
|
||||||
|
=========================
|
||||||
|
To update the interface, you can just download the lastest .json file:
|
||||||
|
::
|
||||||
|
wget -P $HOME/.node-red https://raw.githubusercontent.com/tpollina/PlanktonScope/master/scripts/flows_planktonscope.json
|
||||||
|
|
||||||
|
|
||||||
|
Share WiFi via Ethernet
|
||||||
|
=======================
|
||||||
|
|
||||||
|
At this link : https://www.instructables.com/id/Share-WiFi-With-Ethernet-Port-on-a-Raspberry-Pi/
|
||||||
|
|
||||||
Please find the documentation here :
|
|
||||||
https://planktonscope.readthedocs.io/en/latest/index.html
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue