curious.bio/planktoscope
curious.bio/planktoscope
9
0
Fork 0
Code Issues 10 Pull requests Packages Projects 7 Releases Wiki Activity

Add type to code lines

Browse source
This commit is contained in:
Romain Bazile 2020-07-19 19:22:32 +02:00
parent ede66258bf
commit fd0f0e4269
1 changed files with 7 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
README.md
View file

@ -45,13 +45,13 @@ The first boot to the desktop may take up to 120 seconds. This is normal and is
Make sure you have access to internet and update/upgrade your fresh Raspbian install.
Update your Pi first. Open up a terminal, and do the following:
```
```sh
sudo apt-get update -y
sudo apt-get upgrade -y
```
You can now reboot your Pi safely.
```
```sh
sudo reboot now
```
@ -60,7 +60,7 @@ sudo reboot now
### Enable Camera/SSH/I2C in raspi-config
Open up a terminal once again, and access the configuration tool:
```
```sh
sudo raspi-config
```
@ -79,7 +79,7 @@ This time, choose `No` to deactivate the login shell on the serial connection, b
These steps can also be done from the Raspberry Pi Configuration GUI tool that you can find in `Main Menu > Preferences`. Go to the `Interfaces` tab. Pay attention, here the Serial Port must be enabled, but the Serial Port Console must be disabled.
Reboot your Pi safely.
```
```sh
sudo reboot now
```
@ -89,7 +89,7 @@ sudo reboot now
Start by following [Adafruit's guide](https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi). You can start at the chapter `Install Python Libraries`.
For the record, the command are as following, however, Adafruit's page might have been updated, so please make sure this is still needed:
```
```sh
pip3 install RPI.GPIO
pip3 install adafruit-blinka
sudo pip3 install adafruit-circuitpython-motorkit
@ -100,7 +100,7 @@ sudo pip3 install adafruit-circuitpython-motorkit
You can find more information about the RPi Cam Web Interface on [eLinux' website](https://elinux.org/RPi-Cam-Web-Interface).
To set it up, clone the code from Github and enable and run the install script with the following commands
```
```sh
git clone https://github.com/silvanmelchior/RPi_Cam_Web_Interface.git
cd RPi_Cam_Web_Interface
./install.sh
@ -158,7 +158,7 @@ node-red-pi --max-old-space-size=256
#### Autostart on boot
Run Node-RED when the Pi is turned on, or re-booted, enable the service to autostart by running the command:
```
```sh
sudo systemctl enable nodered.service
```