planktoscope/docs/hardware/chapter_3.md
2022-12-19 02:25:34 +01:00

838 B

Chapter 3

Notes

Topic Description
Time
Tools
Parts

Screw the four Standoffs into Part A

👁 Grab the Part A. 🟣 Locate the four holes on Part A.

🟢 A1. Standoff M2.5 - 6mm- Brass

🟢 B4. Wrenches for standoffs

🟣 Place the Standoff M2.5 - 6mm in the small side of the wrenches for standoffs B4.

🟠 Do not use the big side of the wrenches for standoffs since the standoff will be loose in it.

Place the standoff in the hole and start rotating by hand in a clockwise direction until secure.

Then tighten with the wrench.

Make sure to screw until the standoff is properly inserted in the hole. Do not stop screwing before.

Keep going for each of the four holes.