planktoscope/docs/01_hardware/chapter_6.md
2022-12-17 20:33:50 +01:00

26 lines
903 B
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Chapter 6
## Notes
| Topic | Description |
| --------- | ----------- |
| **Time** | |
| **Tools** | |
| **Parts** | |
## Mount the **Raspberry Pi** on the **Part A**
* ✅ Make sure to position the Raspberry Pi properly on the four standoffs screwed on the Part A.
* ❌ Do not invert the position of the Raspberry Pi on the four standoffs screwed on the Part A.
* 🟣 **A3. Standoff M2.5 - 16mm** - SS
* Screw by hand a Standoff M2.5 - 16mm on the **Raspberry Pi**.
* Screw by hand all Standoffs M2.5 - 16mm on the **Raspberry Pi**.
* Make sure you insert all four standoffs by hand and tighten slightly.
* 🟢 **B4**. Wrenches for standoffs
* 🟠 Secure the Standoff M2.5 - 16 mm - SS **A3** in the big side of the wrenches for standoffs **B4**.
* 🟣 Do not use the small side of the wrenches for standoffs since the standoff wont fit in it.