Romain Bazile b4c9e23905 Documentation update

Addition of ribbon assembly detail
Addition of sdcard creation guide
Update to the image
Make sure it's PlanktoScope everywhere

2020-10-14 13:06:03 +02:00

1.1 KiB

Raw Blame History

PlanktonScope Simple Setup Guide

Download the image

For ease of setup, a preconfigured image is provided. You can download it from here.

Writing the image to the SD card

Download the latest version of balenaEtcher and install it.

Connect an SD card reader with the micro SD card inside.

Open balenaEtcher and select from your hard drive the previously downloaded img file file you wish to write to the SD card.

Select the SD card you wish to write your image to.

Review your selections and click 'Flash!' to begin writing data to the SD card.

Inserting the SD card

Once flashing is over, you can unmount the SD card from the computer (usually done by right clicking on the card icon in the taskbar).

Insert now the card in the Raspberry installed in your PlanktonScope.

Start playing!

Start up your PlanktonScope and connect to its WiFi network. You can now access the webpage at http://planktonscope.local:1880/ui to start using your machine!

1.1 KiB Raw Blame History