smart-energy-monitor/README.md
2023-02-17 16:34:14 +01:00

1.8 KiB

IoT Platform

Docker

First install DockerDesktop and docker-compose:

Then you can export a path to mount as a volume and spin up the containers:

export DATA_DIR = /some/path/to/mount
docker-compose --file software/container/docker-compose.yml up

Mosquitto

mosquitto_sub -h localhost -t '#' -p 1883
mosquitto_pub -h localhost -p 1883 -t '/' -m $(date --utc +%s)

Grafana

You can login to Grafana: http://localhost:3000/login (admin:admin)

NodeRed

NodeRed is running here: http://localhost:1880/

Hardware

Arduino IDE

We are using HelTec Automation Wirelsess Sticks ESP32 Dev-Boards. Their GitHub repo can be found here: https://github.com/HelTecAutomation/Heltec_ESP32

I had to install VCP Drivers, first: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads

You can add their Board Manager to the boards managers URLs: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/library.json and find their libraries in the IDE (Sketch -> Include Library -> Manage Libraries... Search for "heltec esp32").

These boards are already V3 boards, so be careful selecting the right board and port (VCP).

Arduino IDE

Install esptool

Esptool is a Pyhton program to flash ESP32. As it's a Pyhton tool you can install it using pip:

pip install esptool

Find the port

Usually you can find the used port using esptool.py:

esptool.py write_flash_status --non-volatile 0

Using MicroPython

Download the firmware:

Flash it using esptool: https://micropython.org/download/GENERIC_S3/

esptool.py --chip esp32s3  write_flash -z 0  ~/Desktop/GENERIC_S3-20220117-v1.18.bin