1.9 KiB

Raw Blame History

Hardware

We are using HelTec Automation Wirelsess Sticks ESP32 Dev-Boards.

PinOut

The PinOut of our version 3 modules can be found here: https://docs.heltec.org/en/node/esp32/dev-board/hardware_update_log.html#wifi-lora-32-hardware-update-logs

License

For some parts of the Heltec board you need a "license".

USB-C

Our HelTec Automation Wirelsess Sticks ESP32 Dev-Boards already have USB-C. But they do not support Power Deliver (PD). If your computer tries to do PD, just plug a cheap USB hub between the board and your computer.

Arduino IDE

HelTecs GitHub repo can be found here: https://github.com/HelTecAutomation/Heltec_ESP32

I had to install VCP Drivers, first: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads

You can add their Board Manager to the boards managers URLs: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/library.json and find their libraries in the IDE (Sketch -> Include Library -> Manage Libraries... Search for "heltec esp32").

These boards are already V3 boards, so be careful selecting the right board and port (VCP).

Install esptool

Esptool is a Pyhton program to flash ESP32. As it's a Pyhton tool you can install it using pip:

pip install esptool

Find the port

Usually you can find the used port using esptool.py:

esptool.py write_flash_status --non-volatile 0

Using MicroPython

Download the firmware: https://micropython.org/download/

Flash it using esptool: https://micropython.org/download/GENERIC_S3/

esptool.py --chip esp32s3  write_flash -z 0  ~/Desktop/GENERIC_S3-20220117-v1.18.bin

1.9 KiB Raw Blame History