planktoscope/docs/hardware/chapter_8.md
2022-12-19 02:25:34 +01:00

59 lines
1.2 KiB
Markdown

# Chapter 8
## Notes
| Topic | Description |
| --------- | ----------- |
| **Time** | |
| **Tools** | |
| **Parts** | |
## Mount the PlanktoScope HAT on the Raspberry Pi
### Locate
󰔞 Locate the **PlanktoScope HAT** present in **bag I**.
### Ribbon cable
🔴Thread the **Ribbon cable** through the **PlanktoScope HAT** slot from the
underside.
!!! warning
⚠ Make sure the two 🟣black connectors are aligned before threading through the ribbon.
### Plug
Plug the **PlanktoScope HAT** into the **Raspberry Pi**.
!!! warning
⚠ Make sure the two black connectors are aligned before attaching them together.
### Connect
Press the **PlanktoScope HAT** against the **Raspberry Pi** until it is no longer possible to move them closer together.
!!! warning
⚠ Continue to feed through the Ribbon Cable and do not crush it while pressing the PlanktoScope HAT against the standoffs.
---
🟠 **A4**. Screw **M2.5X5mm** CHC - SS
---
🟣 Locate the 4 holes on the top of the **PlanktoScope HAT** and insert the four **M2.5X5mm**
---
🟡 **B3**. Allen key 2mm
---
Screw the four **A4** screws through the **PlanktoScope HAT** onto the **Standoff M2.5 - 16mm**.
🎬 Store this assembly for later.